DRV8847PWPR vs DRV8806PWPR तुलना

विस्तृत दोनों ओर की तुलना DRV8847PWPR द्वारा Texas Instruments और DRV8806PWPR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
DRV8847PWPR DRV8847PWPR - 18V 2A Dual H-Bridge Motor Driver | Texas Instruments

DRV8847PWPR - 18V 2A Dual H-Bridge Motor Driver | Texas Instruments

DRV8847PWPR ✓ सक्रिय
Texas Instruments
DRV8806PWPR DRV8806PWPR - 40V 3A Quad Low-Side Motor Driver | TI

DRV8806PWPR - 40V 3A Quad Low-Side Motor Driver | TI

DRV8806PWPR ✓ सक्रिय

विशेषता तुलना

पैरामीटर DRV8847PWPR DRV8806PWPR
ब्रांड Texas Instruments Texas Instruments
श्रेणी Motor Drivers Motor Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Motor Driver Type Dual H-Bridge, Brushed DC / Bipolar Stepper —
Number of H-Bridges 2 —
आउटपुट कॉन्फ़िगरेशन Half-Bridge (independent control) x 4 Low-side DMOS, open drain
Supply Voltage (Operating) 0 V to 11 V —
Supply Voltage (Absolute Max) 18 V —
Continuous Output Current per H-Bridge 1.5 A (with proper PCB thermal design) —
Peak Output Current per H-Bridge 2 A —
Current Regulation Yes (internal PWM chopping with sense resistor) —
RDS(on) (HS + LS per FET) [DATA_NEEDED: RDS(on) per MOSFET] —
Quiescent Current (Typical) 7.5 mA —
Logic Input Voltage 1.8 V to 5.5 V —
ऑपरेटिंग तापमान रेंज -40 C to +125 C —
पैकेज HTSSOP-16 (PWP) with PowerPAD HTSSOP-16 (PWP) with PowerPAD
Package Thermal Resistance (theta_JB) [DATA_NEEDED: theta_JB] —
माउंटिंग प्रकार Surface Mount Surface Mount
Protection Features OCP, OVP, OTP, UVLO —
MSL स्तर [DATA_NEEDED: MSL level] 2
RoHS स्थिति Compliant Compliant
Number of Channels — 4 (quad low-side)
Supply Voltage (VM) — 8.2 V to 38 V
Continuous Output Current per Channel — 2 A
Peak Output Current per Channel — 3 A
RDS(on) per Channel — 200 mOhm (typical)
इंटरफ़ेस — SPI (serial, 3.3 V logic)
Open-Load Detection — Yes, via SPI
ओवरकरंट प्रोटेक्शन — Yes, per channel
थर्मल शटडाउन — Yes
Undervoltage Lockout — Yes
Built-in Clamp Diodes — Yes (freewheeling)
ऑपरेटिंग तापमान — -40C to +85C

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध