DRV8847PWPR vs DRV8806PWPR So sánh

So sánh chi tiết song song của DRV8847PWPR bằng Texas Instruments và DRV8806PWPR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
DRV8847PWPR DRV8847PWPR - 18V 2A Dual H-Bridge Motor Driver | Texas Instruments

DRV8847PWPR - 18V 2A Dual H-Bridge Motor Driver | Texas Instruments

DRV8847PWPR ✓ Hoạt động
Texas Instruments
DRV8806PWPR DRV8806PWPR - 40V 3A Quad Low-Side Motor Driver | TI

DRV8806PWPR - 40V 3A Quad Low-Side Motor Driver | TI

DRV8806PWPR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số DRV8847PWPR DRV8806PWPR
Thương hiệu Texas Instruments Texas Instruments
Danh mục Motor Drivers Motor Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Motor Driver Type Dual H-Bridge, Brushed DC / Bipolar Stepper —
Number of H-Bridges 2 —
Cấu hình đầu ra Half-Bridge (independent control) x 4 Low-side DMOS, open drain
Supply Voltage (Operating) 0 V to 11 V —
Supply Voltage (Absolute Max) 18 V —
Continuous Output Current per H-Bridge 1.5 A (with proper PCB thermal design) —
Peak Output Current per H-Bridge 2 A —
Current Regulation Yes (internal PWM chopping with sense resistor) —
RDS(on) (HS + LS per FET) [DATA_NEEDED: RDS(on) per MOSFET] —
Quiescent Current (Typical) 7.5 mA —
Logic Input Voltage 1.8 V to 5.5 V —
Khoảng nhiệt độ hoạt động -40 C to +125 C —
Hộp HTSSOP-16 (PWP) with PowerPAD HTSSOP-16 (PWP) with PowerPAD
Package Thermal Resistance (theta_JB) [DATA_NEEDED: theta_JB] —
Kiểu lắp đặt Surface Mount Surface Mount
Protection Features OCP, OVP, OTP, UVLO —
Cấp MSL [DATA_NEEDED: MSL level] 2
Trạng thái RoHS Compliant Compliant
Number of Channels — 4 (quad low-side)
Supply Voltage (VM) — 8.2 V to 38 V
Continuous Output Current per Channel — 2 A
Peak Output Current per Channel — 3 A
RDS(on) per Channel — 200 mOhm (typical)
Giao diện — SPI (serial, 3.3 V logic)
Open-Load Detection — Yes, via SPI
Bảo vệ quá dòng — Yes, per channel
Tắt nhiệt — Yes
Undervoltage Lockout — Yes
Built-in Clamp Diodes — Yes (freewheeling)
Nhiệt độ hoạt động — -40C to +85C

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá