DRV8886ATPWPR vs DRV8873HPWPR तुलना
विस्तृत दोनों ओर की तुलना DRV8886ATPWPR द्वारा Texas Instruments और DRV8873HPWPR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
DRV8886ATPWPR - 37V 2A Stepper Driver w/ AutoTune | Texas Instruments
DRV8886ATPWPR ✓ सक्रियTexas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ सक्रियविशेषता तुलना
| पैरामीटर | DRV8886ATPWPR | DRV8873HPWPR |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Motor Drivers | Motor Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Motor Type | Bipolar stepper (2-phase) | Brushed DC |
| Number of Half-Bridges | 4 (2 H-bridges) | — |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Maximum Full-Scale Output Current | 2 A | — |
| RMS Output Current (24 V, TA = 25 C) | 1.4 A | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Microstepping Levels | 1, 2, 4, 8, 16, 32 (up to 1/16 native) | — |
| Current Sensing | Integrated (no external sense resistors) | — |
| Decay Mode | AutoTune (smart-tune, adaptive mixed decay) | — |
| Control Interface | STEP / DIR (indexer built-in) | PH/EN (hardware) or PWM, selectable via MODE |
| RDS(on) per FET (typ) | 750 mOhm (HS + LS, TA = 25 C) per TI datasheet | — |
| Protection Features | OCP, OTP/TSD, UVLO, open-load detect, fault flag (nFAULT) | — |
| Sleep Current | [DATA_NEEDED: nSLEEP quiescent current] | — |
| ऑपरेटिंग तापमान | -40 C to +125 C | -40 C to +125 C |
| पैकेज | HTSSOP-24 (PWP) with PowerPAD, 7.8 mm x 4.4 mm | 24-pin HTSSOP (PWP) with PowerPAD |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | 2 | 3 (168 hr / 260 C) |
| RoHS / Pb-Free | Yes (compliant) | — |
| टोपोलॉजी | — | H-Bridge (4 N-channel MOSFETs) |
| Supply Voltage (VM) | — | 4.5 V to 38 V |
| Absolute Maximum VM | — | 40 V |
| Peak Output Current | — | 10 A |
| Continuous Output Current | — | 3.5 A (with proper PCB thermal design) |
| RDS(on) per HS+LS FET | — | [DATA_NEEDED: typical mOhm at 25 C] |
| Integrated Current Sensing | — | Yes (IPROPI analog output) |
| Current Regulation | — | Yes (Smart-tune or fixed off-time) |
| RoHS स्थिति | — | Compliant |
| AEC-Q100 | — | Not qualified (use DRV8873-Q1 for automotive) |