DRV8886ATPWPR vs DRV8873HPWPR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng DRV8886ATPWPR sa pamamagitan ng Texas Instruments at DRV8873HPWPR sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
DRV8886ATPWPR - 37V 2A Stepper Driver w/ AutoTune | Texas Instruments
DRV8886ATPWPR ✓ NakahandaTexas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | DRV8886ATPWPR | DRV8873HPWPR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Motor Drivers | Motor Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Motor Type | Bipolar stepper (2-phase) | Brushed DC |
| Number of Half-Bridges | 4 (2 H-bridges) | — |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Maximum Full-Scale Output Current | 2 A | — |
| RMS Output Current (24 V, TA = 25 C) | 1.4 A | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Microstepping Levels | 1, 2, 4, 8, 16, 32 (up to 1/16 native) | — |
| Current Sensing | Integrated (no external sense resistors) | — |
| Decay Mode | AutoTune (smart-tune, adaptive mixed decay) | — |
| Control Interface | STEP / DIR (indexer built-in) | PH/EN (hardware) or PWM, selectable via MODE |
| RDS(on) per FET (typ) | 750 mOhm (HS + LS, TA = 25 C) per TI datasheet | — |
| Protection Features | OCP, OTP/TSD, UVLO, open-load detect, fault flag (nFAULT) | — |
| Sleep Current | [DATA_NEEDED: nSLEEP quiescent current] | — |
| Temperature na Operasyon | -40 C to +125 C | -40 C to +125 C |
| Packhaging | HTSSOP-24 (PWP) with PowerPAD, 7.8 mm x 4.4 mm | 24-pin HTSSOP (PWP) with PowerPAD |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Level ng MSL | 2 | 3 (168 hr / 260 C) |
| RoHS / Pb-Free | Yes (compliant) | — |
| Topolohiya | — | H-Bridge (4 N-channel MOSFETs) |
| Supply Voltage (VM) | — | 4.5 V to 38 V |
| Absolute Maximum VM | — | 40 V |
| Peak Output Current | — | 10 A |
| Continuous Output Current | — | 3.5 A (with proper PCB thermal design) |
| RDS(on) per HS+LS FET | — | [DATA_NEEDED: typical mOhm at 25 C] |
| Integrated Current Sensing | — | Yes (IPROPI analog output) |
| Current Regulation | — | Yes (Smart-tune or fixed off-time) |
| Tindminan RoHS | — | Compliant |
| AEC-Q100 | — | Not qualified (use DRV8873-Q1 for automotive) |