EPC8QI100N vs EPC8QC100DM तुलना

विस्तृत दोनों ओर की तुलना EPC8QI100N द्वारा Altera और EPC8QC100DM द्वारा Intel. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

विशेषता तुलना

पैरामीटर EPC8QI100N EPC8QC100DM
ब्रांड Altera Intel
श्रेणी EEPROM EEPROM
लाइफसाइकिल स्थिति NRND Obsolete
Manufacturer Altera (Intel) —
Part Family EPC8 (Enhanced Configuration) —
Device Type Configuration PROM for SRAM-based FPGAs —
मेमोरी आकार 8 Mbit (8,388,608 bits) 8 Mb (1 MB)
Programmable Type In System Programmable (Flash) —
Configuration Interface Altera serial (4-wire: DATA, DCLK, nCS, nINIT_CONF) —
Maximum Configuration Clock 50 MHz —
On-Chip Decompression Yes (Altera compression algorithm) —
Supply Voltage (VCC) 3.0 V to 3.6 V 3.0 V to 3.6 V (3.3 V typical)
ऑपरेटिंग तापमान -40 °C to +85 °C (Industrial) -40 C to +85 C (industrial / DM suffix)
पैकेज 100-PQFP / 100-BQFP (20 x 14 mm) 100-PQFP (20 x 14 mm)
पिन काउंट 100 —
माउंटिंग प्रकार Surface Mount Surface Mount
Lead-Free / RoHS Yes (per distributor listings) —
JTAG (IEEE 1149.1) ISP Supported —
Multi-Device Daisy-Chain Supported —
Target FPGA Families ACEX 1K, APEX 20K, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, Mercury, Stratix, Stratix GX, Stratix II, Stratix II GX —
Packaging Tray —
मेमोरी प्रकार — Non-volatile configuration PROM
इंटरफ़ेस — Serial (Passive Serial / Passive Parallel Synchronous / Active Serial)
Maximum DCLK Frequency — 40 MHz
In-System Programming — Yes (IEEE 1149.1 / IEEE 1532 JTAG)
Cascade Support — Yes - two EPC8 devices for 16 Mb
MSL स्तर — 1 (Unlimited)
RoHS स्थिति — Compliant
Lead-Free / Halogen-Free — Lead-free (per supplier); halogen status not in datasheet excerpt
Compatible FPGA Families — Cyclone, Cyclone II, Cyclone III, Stratix, Arria
Configuration Modes — PS, PPS, AS (with appropriate FPGA master)
Programming Cycles — [DATA_NEEDED: minimum erase/write endurance cycles]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध