EPM5016DC-20 vs EPM5032DC-2 तुलना
विस्तृत दोनों ओर की तुलना EPM5016DC-20 द्वारा Altera और EPM5032DC-2 द्वारा Altera. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | EPM5016DC-20 | EPM5032DC-2 |
|---|---|---|
| ब्रांड | Altera | Altera |
| श्रेणी | FPGA & CPLD | FPGA & CPLD |
| लाइफसाइकिल स्थिति | Obsolete | Obsolete |
| Family | MAX 5000 | — |
| Device Type | EPLD (UV-Erasable Programmable Logic Device) | — |
| Macrocells | 16 | 32 |
| Product Terms | 160 | — |
| Dedicated Inputs | 7 | — |
| I/O Pins | 8 | — |
| Propagation Delay (tPD) | 20 ns | — |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 62.5 MHz | — |
| Maximum Supply Voltage | 5.25 V | — |
| Nominal Supply Voltage | 5.0 V | — |
| Process Technology | CMOS, UV-erasable | — |
| Architecture | PAL-type macrocell with Programmable Interconnect Array (PIA) | — |
| Package Type | 20-pin Ceramic DIP (Cerdip) with UV window | — |
| Package Suffix Code | DC = Ceramic DIP, Commercial | — |
| Speed Grade | -20 = 20 ns tPD | -2 (tPD ~25 ns, commercial) |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | 0C to +70C (commercial grade) |
| Programming Method | UV erase + EPROM-style programming via Altera programming hardware | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS compliance - CDIP package typically pre-RoHS] |
| Product Type | — | CPLD (Complex Programmable Logic Device) |
| Series | — | MAX 5000 |
| Usable Gates (typical) | — | 600 |
| Logic Array Blocks (LABs) | — | 4 |
| पैकेज | — | 20-pin CDIP (Ceramic DIP) |
| Configuration Memory | — | EPROM (one-time programmable per generation; UV-erasable variants exist) |
| Supply Voltage (VCC) | — | 5 V (single supply, +/-5%) |
| Programmable Pins / I/O | — | 20 pins (JEDEC-standard 0.300" ceramic DIP) |
| Programming Interface | — | Altera ByteBlaster / parallel-port JTAG-style ISP |
| Interconnect | — | Programmable Interconnect Array (PIA) with deterministic timing |
| माउंटिंग प्रकार | — | Through-Hole (DIP) |
| MSL स्तर | — | Not applicable (through-hole hermetic ceramic) |