EPM5192IC-1 vs EPM5192LI-1 तुलना
विस्तृत दोनों ओर की तुलना EPM5192IC-1 द्वारा Altera और EPM5192LI-1 द्वारा Altera. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | EPM5192IC-1 | EPM5192LI-1 |
|---|---|---|
| ब्रांड | Altera | Altera |
| श्रेणी | FPGA & CPLD | FPGA & CPLD |
| लाइफसाइकिल स्थिति | Obsolete | NRND |
| Family | MAX 5000 EPLD | MAX 5000 |
| Macrocells | 192 | 192 |
| Usable Gates | 3750 | 3,750 |
| Dedicated Inputs | 7 | — |
| I/O Pins | 64 | — |
| Pin-to-Pin Delay (tPD) | 15 ns (max, -1 speed grade) | — |
| Counter Frequency (fCNT) | 76.9 MHz | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V (nominal 5 V) | — |
| ऑपरेटिंग तापमान | -40C to +85C (industrial) | [DATA_NEEDED: industrial vs military range] |
| Technology | CMOS, UV-erasable, in-system programmable | — |
| पैकेज | 68-pin ceramic J-lead (IC-1 suffix) | — |
| Programming Interface | JTAG / IEEE Std 1149.1 boundary scan | — |
| Security Bit | Yes (design protection) | — |
| Supply Current (Icc, typical) | [DATA_NEEDED: Icc] mA | — |
| Output Drive Current (IOH/IOL) | [DATA_NEEDED: IOH/IOL] mA | — |
| Device Type | — | EPLD (UV-Erasable/OTP Complex PLD) |
| Maximum Toggle Frequency | — | 40 MHz |
| सप्लाई वोल्टेज | — | 5 V |
| Propagation Delay (tPD) | — | [DATA_NEEDED: tPD in ns at -1 grade] |
| User I/O Pins | — | [DATA_NEEDED: user I/O count for JLCC variant] |
| Package Type | — | JLCC (windowed, ceramic, UV-erasable) |
| Process Technology | — | CMOS EPROM, UV-erasable |
| Speed Grade | — | -1 |
| पिन काउंट | — | [DATA_NEEDED: pin count of LI package] |
| माउंटिंग प्रकार | — | Surface Mount (JLCC with J-leads) |
| MSL स्तर | — | [DATA_NEEDED: MSL level] |
| RoHS स्थिति | — | [DATA_NEEDED: RoHS status of ceramic LI variant] |
| Lead Free | — | [DATA_NEEDED: lead-free] |
| Programmable Interconnect | — | Programmable Interconnect Array (PIA) |
| Architecture | — | EEPROM/EPROM-based, non-volatile, instant-on |