INA116UAG4 vs INA114BU तुलना
विस्तृत दोनों ओर की तुलना INA116UAG4 द्वारा Texas Instruments और INA114BU द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 Obsoleteविशेषता तुलना
| पैरामीटर | INA116UAG4 | INA114BU |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | Obsolete | सक्रिय |
| Product Type | Ultra-low-input-bias-current instrumentation amplifier | Low-cost, general-purpose precision instrumentation amplifier |
| Input Bias Current at 25°C | 3 fA typical | — |
| Input Bias Current at 85°C | 25 fA typical | — |
| Gain Range | 1 to 1000 | 1 to 10,000 |
| Gain Setting Method | 1 external resistor | — |
| Internal Topology | 3-op-amp instrumentation amplifier | — |
| Input Stage | Monolithic FET input | — |
| Bandwidth | 800 kHz -3 dB | — |
| Slew Rate | 0.8 V/µs | 0.06 V/µs |
| Number of Circuits | 1 circuit | 1 circuit |
| Differential Input | Yes | — |
| Input Guarding | Special input guarding techniques | — |
| पैकेज | 16-pin SOIC | 16-pin SOIC |
| Package Code | UA | — |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Temperature Grade | Industrial | — |
| Amplifier Type | Standard general-purpose instrumentation amplifier | Precision instrumentation amplifier |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 2.25 V to 18 V |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| आउटपुट वोल्टेज रेंज | [DATA_NEEDED: output voltage range] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH compliance status] |
| Architecture | — | Three-op-amp design |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Offset Voltage | — | 50 uV |
| Input Noise Density | — | 11 nV/√Hz |
| Typical Supply Current | — | 3 mA |
| Gain-Setting Method | — | One external resistor |
| Input Protection Range | — | ±40 V |
| Settling Time | — | 600 ns |