INA116UAG4 vs INA114BU Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA116UAG4 tarafından Texas Instruments ve INA114BU tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 ObsoleteÖzellik Karşılaştırması
| Parametre | INA116UAG4 | INA114BU |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Obsolete | Aktif |
| Product Type | Ultra-low-input-bias-current instrumentation amplifier | Low-cost, general-purpose precision instrumentation amplifier |
| Input Bias Current at 25°C | 3 fA typical | — |
| Input Bias Current at 85°C | 25 fA typical | — |
| Gain Range | 1 to 1000 | 1 to 10,000 |
| Gain Setting Method | 1 external resistor | — |
| Internal Topology | 3-op-amp instrumentation amplifier | — |
| Input Stage | Monolithic FET input | — |
| Bandwidth | 800 kHz -3 dB | — |
| Slew Rate | 0.8 V/µs | 0.06 V/µs |
| Number of Circuits | 1 circuit | 1 circuit |
| Differential Input | Yes | — |
| Input Guarding | Special input guarding techniques | — |
| Paket | 16-pin SOIC | 16-pin SOIC |
| Package Code | UA | — |
| Montaj Türü | Surface mount | Surface mount |
| Temperature Grade | Industrial | — |
| Amplifier Type | Standard general-purpose instrumentation amplifier | Precision instrumentation amplifier |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 2.25 V to 18 V |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Çıkış Gerilimi Aralığı | [DATA_NEEDED: output voltage range] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH compliance status] |
| Architecture | — | Three-op-amp design |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Offset Voltage | — | 50 uV |
| Input Noise Density | — | 11 nV/√Hz |
| Typical Supply Current | — | 3 mA |
| Gain-Setting Method | — | One external resistor |
| Input Protection Range | — | ±40 V |
| Settling Time | — | 600 ns |