INA116UAG4 vs INA114BU השוואה
השוואה מפורטת זה לצד זה של INA116UAG4 מאת Texas Instruments ו INA114BU מאת Texas Instruments. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.
Texas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 Obsoleteהשוואת מפרטים
| פרמטר | INA116UAG4 | INA114BU |
|---|---|---|
| מותג | Texas Instruments | Texas Instruments |
| קטגוריה | Amplifier ICs | Amplifier ICs |
| סטטוס מחזור חיים | Obsolete | פעיל |
| Product Type | Ultra-low-input-bias-current instrumentation amplifier | Low-cost, general-purpose precision instrumentation amplifier |
| Input Bias Current at 25°C | 3 fA typical | — |
| Input Bias Current at 85°C | 25 fA typical | — |
| Gain Range | 1 to 1000 | 1 to 10,000 |
| Gain Setting Method | 1 external resistor | — |
| Internal Topology | 3-op-amp instrumentation amplifier | — |
| Input Stage | Monolithic FET input | — |
| Bandwidth | 800 kHz -3 dB | — |
| Slew Rate | 0.8 V/µs | 0.06 V/µs |
| Number of Circuits | 1 circuit | 1 circuit |
| Differential Input | Yes | — |
| Input Guarding | Special input guarding techniques | — |
| מארז | 16-pin SOIC | 16-pin SOIC |
| Package Code | UA | — |
| סוג הרכבה | Surface mount | Surface mount |
| Temperature Grade | Industrial | — |
| Amplifier Type | Standard general-purpose instrumentation amplifier | Precision instrumentation amplifier |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 2.25 V to 18 V |
| טווח טמפרטורת פעולה | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| טווח מתח פלט | [DATA_NEEDED: output voltage range] | — |
| סטטוס RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH compliance status] |
| Architecture | — | Three-op-amp design |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Offset Voltage | — | 50 uV |
| Input Noise Density | — | 11 nV/√Hz |
| Typical Supply Current | — | 3 mA |
| Gain-Setting Method | — | One external resistor |
| Input Protection Range | — | ±40 V |
| Settling Time | — | 600 ns |