INA116UAG4 vs INA114BU Perbandingan
Perbandingan bersamaan detil INA116UAG4 dari Texas Instruments dan INA114BU dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 ObsoletePerbandingan Spesifikasi
| Parameter Umum | INA116UAG4 | INA114BU |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Obsolete | Aktif |
| Product Type | Ultra-low-input-bias-current instrumentation amplifier | Low-cost, general-purpose precision instrumentation amplifier |
| Input Bias Current at 25°C | 3 fA typical | — |
| Input Bias Current at 85°C | 25 fA typical | — |
| Gain Range | 1 to 1000 | 1 to 10,000 |
| Gain Setting Method | 1 external resistor | — |
| Internal Topology | 3-op-amp instrumentation amplifier | — |
| Input Stage | Monolithic FET input | — |
| Bandwidth | 800 kHz -3 dB | — |
| Slew Rate | 0.8 V/µs | 0.06 V/µs |
| Number of Circuits | 1 circuit | 1 circuit |
| Differential Input | Yes | — |
| Input Guarding | Special input guarding techniques | — |
| Paket | 16-pin SOIC | 16-pin SOIC |
| Package Code | UA | — |
| Tipe Mounting | Surface mount | Surface mount |
| Temperature Grade | Industrial | — |
| Amplifier Type | Standard general-purpose instrumentation amplifier | Precision instrumentation amplifier |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 2.25 V to 18 V |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Rentang Tegangan Output | [DATA_NEEDED: output voltage range] | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH compliance status] |
| Architecture | — | Three-op-amp design |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Offset Voltage | — | 50 uV |
| Input Noise Density | — | 11 nV/√Hz |
| Typical Supply Current | — | 3 mA |
| Gain-Setting Method | — | One external resistor |
| Input Protection Range | — | ±40 V |
| Settling Time | — | 600 ns |