INA116UAG4 vs INA114BU موازنہ
تفصیلی ساتھ ساتھ موازنہ از INA116UAG4 بذریعہ Texas Instruments اور INA114BU بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Texas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 Obsoleteخصوصیات کا موازنہ
| پیرامیٹر | INA116UAG4 | INA114BU |
|---|---|---|
| برانڈ | Texas Instruments | Texas Instruments |
| زمرہ | Amplifier ICs | Amplifier ICs |
| لائف سائیکل کی حالت | Obsolete | فعال |
| Product Type | Ultra-low-input-bias-current instrumentation amplifier | Low-cost, general-purpose precision instrumentation amplifier |
| Input Bias Current at 25°C | 3 fA typical | — |
| Input Bias Current at 85°C | 25 fA typical | — |
| Gain Range | 1 to 1000 | 1 to 10,000 |
| Gain Setting Method | 1 external resistor | — |
| Internal Topology | 3-op-amp instrumentation amplifier | — |
| Input Stage | Monolithic FET input | — |
| Bandwidth | 800 kHz -3 dB | — |
| Slew Rate | 0.8 V/µs | 0.06 V/µs |
| Number of Circuits | 1 circuit | 1 circuit |
| Differential Input | Yes | — |
| Input Guarding | Special input guarding techniques | — |
| پیکیج | 16-pin SOIC | 16-pin SOIC |
| Package Code | UA | — |
| ماؤنٹنگ ٹائپ | Surface mount | Surface mount |
| Temperature Grade | Industrial | — |
| Amplifier Type | Standard general-purpose instrumentation amplifier | Precision instrumentation amplifier |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 2.25 V to 18 V |
| آپریٹنگ درجہ حرارت رینج | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| آؤٹ پٹ وولٹیج کی حد | [DATA_NEEDED: output voltage range] | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH compliance status] |
| Architecture | — | Three-op-amp design |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Offset Voltage | — | 50 uV |
| Input Noise Density | — | 11 nV/√Hz |
| Typical Supply Current | — | 3 mA |
| Gain-Setting Method | — | One external resistor |
| Input Protection Range | — | ±40 V |
| Settling Time | — | 600 ns |