INA121P vs AD620ANZ तुलना
विस्तृत दोनों ओर की तुलना INA121P द्वारा Texas Instruments और AD620ANZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ सक्रियAnalog Devices
AD620ANZ - 1-Channel Low-Power Instrumentation Amplifier | Analog Devices
AD620ANZ Unknownविशेषता तुलना
| पैरामीटर | INA121P | AD620ANZ |
|---|---|---|
| ब्रांड | Texas Instruments | Analog Devices |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | Unknown |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | — |
| Number of Channels | 1 | 1 channel |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | 2 nA |
| Input Offset Voltage | ±200 µV typical | [DATA_NEEDED: input offset voltage] |
| Input Offset Drift | ±2 µV/°C typical | — |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| क्वाइसेंट करंट | ±450 µA typical | — |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | — |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 1 to 10,000 |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Input Protection | ±40 V differential and common-mode | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| पैकेज | 8-Pin PDIP (P) | 8-lead PDIP |
| माउंटिंग प्रकार | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | — |
| RoHS स्थिति | Compliant | unknown |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Product Type | — | Low-cost, low-power, high-accuracy instrumentation amplifier |
| External Gain Setting | — | One external resistor |
| Gain-Bandwidth Product | — | 1 MHz |
| Maximum Supply Current | — | 1.3 mA |
| सप्लाई वोल्टेज | — | [DATA_NEEDED: supply voltage range] |
| Common-Mode Rejection | — | 110 dB |
| Input Noise | — | [DATA_NEEDED: input noise] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Package Family | — | PDIP family, through-hole DIP |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Applications | — | Precision data acquisition, sensor conditioning, portable instrumentation |