LPC4357JBD208K vs LPC4078FET208 तुलना
विस्तृत दोनों ओर की तुलना LPC4357JBD208K द्वारा NXP Semiconductors और LPC4078FET208 द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
LPC4357JBD208K - ARM Cortex-M4/M0 MCU, 1MB Flash, 208-LQFP | NXP
LPC4357JBD208K ✓ सक्रियNXP Semiconductors
LPC4078FET208 - 32-bit Arm Cortex-M4 MCU, 512KB Flash | NXP
LPC4078FET208 ✓ सक्रियविशेषता तुलना
| पैरामीटर | LPC4357JBD208K | LPC4078FET208 |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M4 (with FPU) + Cortex-M0 coprocessor | — |
| Bit Width | 32-bit | — |
| Number of Cores | 2 (dual-core asymmetric) | — |
| Maximum CPU Frequency | 204 MHz | 120 MHz |
| Program Memory (Flash) | 1 MB (1M x 8) | — |
| SRAM | 136 kB | 96 KB |
| EEPROM | 16 kB | 4 KB (emulated) |
| सप्लाई वोल्टेज | 3.3 V (typical) | 1.8 V to 3.6 V |
| पैकेज | 208-LQFP (28x28 mm) | 208-TFBGA (15x15 mm) |
| माउंटिंग प्रकार | Surface Mount | — |
| High-Speed USB | 2 ports (one with on-chip HS PHY) | — |
| Ethernet | 10/100 MAC included | 10/100 MAC (MII/RMII) |
| Quad SPI Flash Interface (SPIFI) | Yes | — |
| External Memory Controller (EMC) | Yes (SRAM/SDRAM/NOR/NAND) | Yes (SRAM/NOR/SDRAM) |
| LCD Controller | Yes (STN/TFT) | — |
| State Configurable Timer (SCT) | Yes | — |
| Serial GPIO (SGPIO) | Yes | — |
| RoHS स्थिति | Compliant | Compliant |
| Operating Temperature Grade | Industrial -40C to +105C (per 'K' suffix, [DATA_NEEDED: exact TA range]) | — |
| Core | — | Arm Cortex-M4 (with FPU and DSP) + Arm Cortex-M0 coprocessor |
| Flash Memory | — | 512 KB |
| ऑपरेटिंग तापमान | — | -40 C to +85 C (industrial) |
| USB | — | USB 2.0 Host/Device/OTG + USB 2.0 Device/Host |
| CAN | — | 2x CAN 2.0B |
| UART | — | 4x UART |
| I2C | — | 3x (1x Fast-mode Plus 1 Mbit/s, 2x standard) |
| SSP/SPI | — | 3x SSP/SPI |
| I2S | — | 1x I2S audio interface |
| SPIFI (Quad-SPI) | — | Yes |
| ADC | — | 8-channel 10-bit |
| DAC | — | 1x 10-bit |
| Timers / PWM | — | 4 general-purpose timers + motor-control PWM |
| Debug | — | JTAG + SWD + ROM bootloader (UART/USB/SPI) |