LPC4357JBD208K vs LPC4078FET208 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng LPC4357JBD208K sa pamamagitan ng NXP Semiconductors at LPC4078FET208 sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
NXP Semiconductors
LPC4357JBD208K - ARM Cortex-M4/M0 MCU, 1MB Flash, 208-LQFP | NXP
LPC4357JBD208K ✓ NakahandaNXP Semiconductors
LPC4078FET208 - 32-bit Arm Cortex-M4 MCU, 512KB Flash | NXP
LPC4078FET208 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | LPC4357JBD208K | LPC4078FET208 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Microcontrollers | Microcontrollers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Core Architecture | ARM Cortex-M4 (with FPU) + Cortex-M0 coprocessor | — |
| Bit Width | 32-bit | — |
| Number of Cores | 2 (dual-core asymmetric) | — |
| Maximum CPU Frequency | 204 MHz | 120 MHz |
| Program Memory (Flash) | 1 MB (1M x 8) | — |
| SRAM | 136 kB | 96 KB |
| EEPROM | 16 kB | 4 KB (emulated) |
| Volte ng Pagbibigay | 3.3 V (typical) | 1.8 V to 3.6 V |
| Packhaging | 208-LQFP (28x28 mm) | 208-TFBGA (15x15 mm) |
| Uri ng Pagpapasok | Surface Mount | — |
| High-Speed USB | 2 ports (one with on-chip HS PHY) | — |
| Ethernet | 10/100 MAC included | 10/100 MAC (MII/RMII) |
| Quad SPI Flash Interface (SPIFI) | Yes | — |
| External Memory Controller (EMC) | Yes (SRAM/SDRAM/NOR/NAND) | Yes (SRAM/NOR/SDRAM) |
| LCD Controller | Yes (STN/TFT) | — |
| State Configurable Timer (SCT) | Yes | — |
| Serial GPIO (SGPIO) | Yes | — |
| Tindminan RoHS | Compliant | Compliant |
| Operating Temperature Grade | Industrial -40C to +105C (per 'K' suffix, [DATA_NEEDED: exact TA range]) | — |
| Core | — | Arm Cortex-M4 (with FPU and DSP) + Arm Cortex-M0 coprocessor |
| Flash Memory | — | 512 KB |
| Temperature na Operasyon | — | -40 C to +85 C (industrial) |
| USB | — | USB 2.0 Host/Device/OTG + USB 2.0 Device/Host |
| CAN | — | 2x CAN 2.0B |
| UART | — | 4x UART |
| I2C | — | 3x (1x Fast-mode Plus 1 Mbit/s, 2x standard) |
| SSP/SPI | — | 3x SSP/SPI |
| I2S | — | 1x I2S audio interface |
| SPIFI (Quad-SPI) | — | Yes |
| ADC | — | 8-channel 10-bit |
| DAC | — | 1x 10-bit |
| Timers / PWM | — | 4 general-purpose timers + motor-control PWM |
| Debug | — | JTAG + SWD + ROM bootloader (UART/USB/SPI) |