MPVZ5150GC7U vs MPXV10GC7U तुलना
विस्तृत दोनों ओर की तुलना MPVZ5150GC7U द्वारा NXP Semiconductors और MPXV10GC7U द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | MPVZ5150GC7U | MPXV10GC7U |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Pressure Sensors | Pressure Sensors |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 150 kPa (0 PSI to 21.76 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| आउटपुट प्रकार | Analog Voltage (ratiometric) | Analog Wheatstone Bridge (uncompensated mV) |
| आउटपुट वोल्टेज रेंज | 0.2 V to 4.7 V | — |
| सप्लाई वोल्टेज | 4.75 V to 5.25 V | 3 V to 6 V (3 V typical excitation) |
| सप्लाई करंट | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Pressure Accuracy | ±1.5 % (0 °C to 85 °C) | — |
| ऑपरेटिंग तापमान | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Storage Temperature | [DATA_NEEDED: storage temperature] | — |
| Response Time | 1.0 ms (typical) | — |
| Port Style | Top Port, Male 0.13" (3.17 mm) Tube | Top port, 0.13" (3.18 mm) tube inlet |
| पैकेज | 8-DIP (Case 867F, 10.67 x 10.67 x 12.96 mm) | 8-DIP (0.550", 13.97 mm) through-hole |
| माउंटिंग प्रकार | Through Hole | Through-Hole |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS compliance] |
| Technology | Piezoresistive (MEMS) with ASIC signal conditioning | — |
| Media Compatibility | Dry air and non-corrosive gases (silicone gel isolation) | Dry non-corrosive gases (reference port vented to ambient) |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Sensitivity | — | 3.5 mV/kPa nominal |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Compensation | — | None on chip - external calibration required |