MPVZ5150GC7U vs MPXV10GC7U Karşılaştırma
Ayrıntılı yan yana karşılaştırma MPVZ5150GC7U tarafından NXP Semiconductors ve MPXV10GC7U tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | MPVZ5150GC7U | MPXV10GC7U |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 150 kPa (0 PSI to 21.76 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Çıkış Türü | Analog Voltage (ratiometric) | Analog Wheatstone Bridge (uncompensated mV) |
| Çıkış Gerilimi Aralığı | 0.2 V to 4.7 V | — |
| Besleme Gerilimi | 4.75 V to 5.25 V | 3 V to 6 V (3 V typical excitation) |
| Besleme Akımı | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Pressure Accuracy | ±1.5 % (0 °C to 85 °C) | — |
| İşletim Sıcaklığı | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Storage Temperature | [DATA_NEEDED: storage temperature] | — |
| Response Time | 1.0 ms (typical) | — |
| Port Style | Top Port, Male 0.13" (3.17 mm) Tube | Top port, 0.13" (3.18 mm) tube inlet |
| Paket | 8-DIP (Case 867F, 10.67 x 10.67 x 12.96 mm) | 8-DIP (0.550", 13.97 mm) through-hole |
| Montaj Türü | Through Hole | Through-Hole |
| RoHS Durumu | Compliant | [DATA_NEEDED: RoHS compliance] |
| Technology | Piezoresistive (MEMS) with ASIC signal conditioning | — |
| Media Compatibility | Dry air and non-corrosive gases (silicone gel isolation) | Dry non-corrosive gases (reference port vented to ambient) |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Sensitivity | — | 3.5 mV/kPa nominal |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Compensation | — | None on chip - external calibration required |