MPVZ5150GC7U vs MPXV10GC7U Perbandingan
Perbandingan bersamaan detil MPVZ5150GC7U dari NXP Semiconductors dan MPXV10GC7U dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MPVZ5150GC7U | MPXV10GC7U |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 150 kPa (0 PSI to 21.76 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Tipe Output | Analog Voltage (ratiometric) | Analog Wheatstone Bridge (uncompensated mV) |
| Rentang Tegangan Output | 0.2 V to 4.7 V | — |
| Tegangan Pemuat | 4.75 V to 5.25 V | 3 V to 6 V (3 V typical excitation) |
| Arus Pemuat | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Pressure Accuracy | ±1.5 % (0 °C to 85 °C) | — |
| Suhu Kerja | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Storage Temperature | [DATA_NEEDED: storage temperature] | — |
| Response Time | 1.0 ms (typical) | — |
| Port Style | Top Port, Male 0.13" (3.17 mm) Tube | Top port, 0.13" (3.18 mm) tube inlet |
| Paket | 8-DIP (Case 867F, 10.67 x 10.67 x 12.96 mm) | 8-DIP (0.550", 13.97 mm) through-hole |
| Tipe Mounting | Through Hole | Through-Hole |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS compliance] |
| Technology | Piezoresistive (MEMS) with ASIC signal conditioning | — |
| Media Compatibility | Dry air and non-corrosive gases (silicone gel isolation) | Dry non-corrosive gases (reference port vented to ambient) |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Sensitivity | — | 3.5 mV/kPa nominal |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Compensation | — | None on chip - external calibration required |