MPXC2012DT1 vs MPX2010DP तुलना

विस्तृत दोनों ओर की तुलना MPXC2012DT1 द्वारा NXP Semiconductors और MPX2010DP द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ सक्रिय

विशेषता तुलना

पैरामीटर MPXC2012DT1 MPX2010DP
ब्रांड NXP Semiconductors NXP Semiconductors
श्रेणी Pressure Sensors Pressure Sensors
लाइफसाइकिल स्थिति NRND सक्रिय
Pressure Type Differential —
Operating Pressure 1.45 PSI (10 kPa) —
Maximum Over Pressure [DATA_NEEDED: maximum overpressure rating] —
आउटपुट प्रकार Wheatstone Bridge (analog mV) Analog voltage, Wheatstone bridge (mV level)
Full-Scale Output 24 mV to 26 mV (typ. 25 mV) at 10 V excitation —
Offset (Null) 0 mV nominal at 10 V excitation —
Excitation Voltage 10 V DC typical —
Bridge Resistance [DATA_NEEDED: input/output bridge resistance] —
Linearity [DATA_NEEDED: linearity %FS] ±0.05% (typ)
Pressure Port Size Female, 0.128 in (3.25 mm) side port —
Port Style Side port, single barbed inlet —
पैकेज / केस 4-SSIP Module (chip-pak, no gel) —
Termination Style Through-hole PCB (vertical mount) —
Gel Protection No (bare die in chip-pak cavity) —
ऑपरेटिंग तापमान [DATA_NEEDED: operating temperature range] -40 °C to +125 °C
Storage Temperature [DATA_NEEDED: storage temperature range] —
माउंटिंग प्रकार Through-hole, vertical —
RoHS स्थिति [DATA_NEEDED: RoHS compliance status] Compliant
MSL स्तर Not applicable (through-hole sensor module) —
Manufacturer NXP Semiconductors (formerly Freescale / Motorola) —
सेंसर प्रकार — Differential Pressure Sensor
Pressure Range — 0 to 10 kPa (0 to 1.45 PSI)
Technology — Piezoresistive (silicon strain gauge bridge)
Typical Full-Scale Span — 25 mV at 10 V excitation
Zero Pressure Offset — 0 mV nominally (±1.0 mV max)
सप्लाई वोल्टेज — 10 V DC typical (max 16 V)
Temperature Compensation — 0 °C to +85 °C (on-chip)
Response Time — 1.0 ms (typical)
Maximum Overpressure — 75 kPa
Burst Pressure — 200 kPa
Port Configuration — Dual ports (differential), 0.19 inch / 4.93 mm tubes
Package / Mounting — 4-SIP Module (through-hole with axial tubes)
Media Compatibility — Dry air or non-corrosive gas

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध