MPXC2012DT1 vs MPX2010DP Karşılaştırma

Ayrıntılı yan yana karşılaştırma MPXC2012DT1 tarafından NXP Semiconductors ve MPX2010DP tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ Aktif

Özellik Karşılaştırması

Parametre MPXC2012DT1 MPX2010DP
Marka NXP Semiconductors NXP Semiconductors
Kategori Pressure Sensors Pressure Sensors
Yaşam Döngüsü Durumu NRND Aktif
Pressure Type Differential —
Operating Pressure 1.45 PSI (10 kPa) —
Maximum Over Pressure [DATA_NEEDED: maximum overpressure rating] —
Çıkış Türü Wheatstone Bridge (analog mV) Analog voltage, Wheatstone bridge (mV level)
Full-Scale Output 24 mV to 26 mV (typ. 25 mV) at 10 V excitation —
Offset (Null) 0 mV nominal at 10 V excitation —
Excitation Voltage 10 V DC typical —
Bridge Resistance [DATA_NEEDED: input/output bridge resistance] —
Linearity [DATA_NEEDED: linearity %FS] ±0.05% (typ)
Pressure Port Size Female, 0.128 in (3.25 mm) side port —
Port Style Side port, single barbed inlet —
Paket / Kas 4-SSIP Module (chip-pak, no gel) —
Termination Style Through-hole PCB (vertical mount) —
Gel Protection No (bare die in chip-pak cavity) —
İşletim Sıcaklığı [DATA_NEEDED: operating temperature range] -40 °C to +125 °C
Storage Temperature [DATA_NEEDED: storage temperature range] —
Montaj Türü Through-hole, vertical —
RoHS Durumu [DATA_NEEDED: RoHS compliance status] Compliant
MSL Seviyesi Not applicable (through-hole sensor module) —
Manufacturer NXP Semiconductors (formerly Freescale / Motorola) —
Duyarlılık Türü — Differential Pressure Sensor
Pressure Range — 0 to 10 kPa (0 to 1.45 PSI)
Technology — Piezoresistive (silicon strain gauge bridge)
Typical Full-Scale Span — 25 mV at 10 V excitation
Zero Pressure Offset — 0 mV nominally (±1.0 mV max)
Besleme Gerilimi — 10 V DC typical (max 16 V)
Temperature Compensation — 0 °C to +85 °C (on-chip)
Response Time — 1.0 ms (typical)
Maximum Overpressure — 75 kPa
Burst Pressure — 200 kPa
Port Configuration — Dual ports (differential), 0.19 inch / 4.93 mm tubes
Package / Mounting — 4-SIP Module (through-hole with axial tubes)
Media Compatibility — Dry air or non-corrosive gas

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin