TLE7250G vs SN75176BD तुलना

विस्तृत दोनों ओर की तुलना TLE7250G द्वारा Infineon और SN75176BD द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
TLE7250G TLE7250G - 1Mbps ISO 11898-2 CAN Transceiver | Infineon

TLE7250G - 1Mbps ISO 11898-2 CAN Transceiver | Infineon

TLE7250G ✓ सक्रिय
Texas Instruments
SN75176BD SN75176BD - 8-Pin RS-485/RS-422 Transceiver | TI (Tape & Reel)

SN75176BD - 8-Pin RS-485/RS-422 Transceiver | TI (Tape & Reel)

SN75176BD ✓ सक्रिय

विशेषता तुलना

पैरामीटर TLE7250G SN75176BD
ब्रांड Infineon Texas Instruments
श्रेणी RF Transceivers Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type High-speed CAN transceiver Differential bus transceiver
Maximum CAN Data Rate 1 Mbps —
Supply Voltage Range 4.5 V to 5.5 V —
Standard Compliance ISO 11898-2 —
पैकेज SOIC-8 SOIC (D), 8 pins
पिन काउंट 8 pins 8 pins
Bus Outputs CANH and CANL —
Electromagnetic Emissions Low EME —
Electromagnetic Immunity High EMI resistance —
Power-Down Behavior Excellent passive behavior —
Short-Circuit Protection CANH and CANL protected against shorts to GND or the positive supply —
Automotive Qualification AEC-Q100 qualified [DATA_NEEDED: AEC-Q100 qualification]
RoHS Package Status RoHS-compliant PG-DSO-8 package —
Application Domain Automotive and industrial CAN networks —
Network Layer Interface CAN protocol controller to physical CAN bus —
Predecessor Compatibility Pin assignment and function compatible with TLE6250G —
Power-Down Use Case Mixed-supply CAN networks —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: Operating temperature range] 0 °C to 70 °C
Transceiver Receive Delay [DATA_NEEDED: Transceiver receive delay] —
Dominant Output Current [DATA_NEEDED: CANH and CANL dominant output current] —
Recessive Output Current [DATA_NEEDED: CANH and CANL recessive output current] —
सप्लाई वोल्टेज — 5 V
Supported Standards — TIA/EIA-422-B and TIA/EIA-485-A
ITU Recommendations — V.11 and X.27
Communication Mode — Bidirectional
Bus Architecture — Multipoint transmission
Transmission Line Type — Balanced transmission lines
Driver Output State — 3-state
Receiver Output State — 3-state
माउंटिंग प्रकार — Surface mount
Manufacturer — Texas Instruments
RoHS स्थिति — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]
Maximum Data Rate — [DATA_NEEDED: maximum data rate]
Input and Output Electrical Limits — [DATA_NEEDED: input and output electrical limits]
Propagation Delay — [DATA_NEEDED: propagation delay]
क्वाइसेंट करंट — [DATA_NEEDED: quiescent current]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध