TMP816PWR vs DRV8873HPWPR तुलना

विस्तृत दोनों ओर की तुलना TMP816PWR द्वारा Texas Instruments और DRV8873HPWPR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
TMP816PWR TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR ✓ सक्रिय
Texas Instruments
DRV8873HPWPR DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments

DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments

DRV8873HPWPR ✓ सक्रिय

विशेषता तुलना

पैरामीटर TMP816PWR DRV8873HPWPR
ब्रांड Texas Instruments Texas Instruments
श्रेणी Motor Drivers Motor Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
टोपोलॉजी Single-phase full-wave BLDC fan predriver H-Bridge (4 N-channel MOSFETs)
Supply Voltage (VCC) 6 V to 16 V —
Maximum Supply Voltage 18 V —
Load Voltage 10 V —
Output Current 20 mA (gate drive to external PNP+NMOS) —
आउटपुट की संख्या 1 (pre-driver output pair) —
Current Limit Threshold Adjustable (external resistor) —
ऑपरेटिंग तापमान रेंज -30 °C to +95 °C —
Control Input PWM speed command —
Tachometer Output FG (frequency-generator) signal —
External Power Stage PNP + N-channel MOSFET pair —
Protection Features Thermal shutdown, adjustable current limit, lock-rotor protection —
पैकेज 20-pin TSSOP (PW), 4.40 mm width 24-pin HTSSOP (PWP) with PowerPAD
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर 1 (unlimited floor life at <30 °C / 85 % RH) 3 (168 hr / 260 C)
RoHS स्थिति Compliant Compliant
Lead-Free Yes —
Drive Method Full-wave, sensored (Hall-element input) —
Motor Type — Brushed DC
Supply Voltage (VM) — 4.5 V to 38 V
Absolute Maximum VM — 40 V
Peak Output Current — 10 A
Continuous Output Current — 3.5 A (with proper PCB thermal design)
RDS(on) per HS+LS FET — [DATA_NEEDED: typical mOhm at 25 C]
Integrated Current Sensing — Yes (IPROPI analog output)
Control Interface — PH/EN (hardware) or PWM, selectable via MODE
Current Regulation — Yes (Smart-tune or fixed off-time)
ऑपरेटिंग तापमान — -40 C to +125 C
AEC-Q100 — Not qualified (use DRV8873-Q1 for automotive)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध