TMP816PWR vs DRV8873HPWPR Karşılaştırma
Ayrıntılı yan yana karşılaştırma TMP816PWR tarafından Texas Instruments ve DRV8873HPWPR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ AktifÖzellik Karşılaştırması
| Parametre | TMP816PWR | DRV8873HPWPR |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Motor Drivers | Motor Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Ağ Yapısı | Single-phase full-wave BLDC fan predriver | H-Bridge (4 N-channel MOSFETs) |
| Supply Voltage (VCC) | 6 V to 16 V | — |
| Maximum Supply Voltage | 18 V | — |
| Load Voltage | 10 V | — |
| Output Current | 20 mA (gate drive to external PNP+NMOS) | — |
| Çıkış Sayısı | 1 (pre-driver output pair) | — |
| Current Limit Threshold | Adjustable (external resistor) | — |
| İşletim Sıcaklığı Aralığı | -30 °C to +95 °C | — |
| Control Input | PWM speed command | — |
| Tachometer Output | FG (frequency-generator) signal | — |
| External Power Stage | PNP + N-channel MOSFET pair | — |
| Protection Features | Thermal shutdown, adjustable current limit, lock-rotor protection | — |
| Paket | 20-pin TSSOP (PW), 4.40 mm width | 24-pin HTSSOP (PWP) with PowerPAD |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | 1 (unlimited floor life at <30 °C / 85 % RH) | 3 (168 hr / 260 C) |
| RoHS Durumu | Compliant | Compliant |
| Lead-Free | Yes | — |
| Drive Method | Full-wave, sensored (Hall-element input) | — |
| Motor Type | — | Brushed DC |
| Supply Voltage (VM) | — | 4.5 V to 38 V |
| Absolute Maximum VM | — | 40 V |
| Peak Output Current | — | 10 A |
| Continuous Output Current | — | 3.5 A (with proper PCB thermal design) |
| RDS(on) per HS+LS FET | — | [DATA_NEEDED: typical mOhm at 25 C] |
| Integrated Current Sensing | — | Yes (IPROPI analog output) |
| Control Interface | — | PH/EN (hardware) or PWM, selectable via MODE |
| Current Regulation | — | Yes (Smart-tune or fixed off-time) |
| İşletim Sıcaklığı | — | -40 C to +125 C |
| AEC-Q100 | — | Not qualified (use DRV8873-Q1 for automotive) |