Analog Devices

AD746JR - Dual 13MHz Precision BiFET Op Amp | Analog Devices

MPN: AD746JR ✓ सक्रिय
±4.5 V to ±18 V Vdss 8-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

AD746JR अवलोकन

The Analog Devices AD746JR is a dual precision BiFET operational amplifier in an 8-pin SOIC package, combining two AD744 amplifier circuits on one monolithic die. Its headline specifications are 13 MHz gain-bandwidth product, 75 V/µs slew rate, and ±4.5 V to ±18 V supply operation. Both channels benefit from close AC and DC matching because they share the same die and operating environment.

An operational amplifier is an analog signal-conditioning IC that uses high open-loop gain and negative feedback to amplify weak differential signals with high input impedance and low output impedance. Within the amplifier hierarchy, the AD746JR is a voltage-feedback BiFET precision amplifier: a BiFET input stage, dual-channel architecture, and monolithic construction distinguish it from general-purpose CMOS amplifiers and comparators. This combination makes it suitable for instrumentation, filtering, and precision conversion interfaces.

The AD746 datasheet identifies a single-pole response that settles to 0.01% in 500 ns. It also specifies a very low total harmonic distortion of 0.0001%. These characteristics support fast-settling buffer stages for 12-bit and 14-bit DACs and ADCs. The dual architecture also allows one channel to buffer a reference while the other performs amplification, although simultaneous precision performance remains tied to matching load impedances and balanced layout.

Mechanically, the AD746JR uses an 8-pin SOIC package and is identified by the JR ordering code. The precision and BiFET characteristics inherited from the AD744 core give the device low input bias behavior and good DC precision, while the monolithic implementation improves channel-to-channel matching. Applications include low-frequency active filters, audio preamplifier stages, sample-and-hold interfaces, and precision ADC or DAC input buffers.

When using the device, follow the manufacturer's recommended power-supply bypassing and observe the input common-mode range for the selected supply voltage. Decoupling capacitors should be placed close to the supply pins, and sensitive analog inputs should be routed away from switching nodes and high-current return paths. Stable feedback components and careful grounding are essential because the fast settling response can expose instability in poorly compensated filter stages.

This page combines the AD746JR electrical characteristics, drop-in alternatives, application guidance, and practical design notes in one engineering-focused reference. It also identifies where the device differs from related dual JFET-input amplifiers, helping designers balance precision, speed, supply range, and channel matching when selecting an amplifier for an existing design.

के लिए ड्रॉप-इन विकल्प AD746JR — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं AD746JR (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Amplifier Type, Gain-Bandwidth Product, Package, Slew Rate, Supply Voltage Range.

Analog Devices
Amplifier Type: Single J-FET operational amplifier
Gain-Bandwidth Product: 4.5 MHz
Package: 16-pin SOIC, 3.9 mm wide body
इसके साथ तुलना करें AD746JR →
Analog Devices
Amplifier Type: Single JFET-input operational amplifier
Gain-Bandwidth Product: 20 MHz
Package: 16-pin SOIC
इसके साथ तुलना करें AD746JR →

AD746JRZ

✅ ड्रॉप-इन
📦 SOIC-8
Same AD746 electrical configuration and SOIC-8 pinout; ordering code differs by lead-free terminal finish, with 0% change in the 13 MHz gain-bandwidth rating

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD745JR-16

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Analog Devices
📦 SOIC-8
Single JFET-input operational amplifier · 1 circuit · 20 MHz · 12.5 V/µs · ±4.8 V to ±18 V · 9.6 V to 36 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

AD743JR-16

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Analog Devices
📦 SOIC-8
Single J-FET operational amplifier · 1 circuit · 4.5 MHz · 2.8 V/µs · ±18 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

AD744JR

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 SOIC-8
Same AD744-family precision BiFET architecture and SOIC-8 footprint, with lower gain-bandwidth product than the AD746JR and a corresponding reduction in slew-rate and settling margin

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

TL072IDT

✅ ड्रॉप-इन
📦 SOIC-8
Cross-brand dual JFET-input amplifier in the same SOIC-8 footprint, but its 3 MHz gain-bandwidth product is about 77% below the AD746JR's 13 MHz rating

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD746JR Maximum Ratings और Electrical Characteristics

Amplifier Type Dual precision BiFET operational amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 13 MHz
Slew Rate 75 V/µs
Supply Voltage Range ±4.5 V to ±18 V
Maximum Total Supply Voltage 36 V
Settling Time 500 ns to 0.01%
Total Harmonic Distortion 0.0001%
Input Stage BiFET
Internal Amplifier Core Two AD744 amplifiers on a single monolithic die
पैकेज 8-pin SOIC
माउंटिंग प्रकार Surface mount
Channel Matching Close AC and DC matching on a common die
RoHS स्थिति unknown

AD746JR पिन कॉन्फ़िगरेशन

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
पिन 1 OUT A — Channel A output
पिन 2 -IN A — Channel A inverting input
पिन 3 +IN A — Channel A non-inverting input
पिन 4 V- — Negative supply connection
पिन 5 +IN B — Channel B non-inverting input
पिन 6 -IN B — Channel B inverting input
पिन 7 OUT B — Channel B output
पिन 8 V+ — Positive supply connection

सामान्य अनुप्रयोग

AD746JR के लिए उपयुक्त है 6 अनुप्रयोगs: Precision ADC Input Buffer, High-Speed DAC Output Buffer, Active Audio Preamplifier, Low-Frequency Active Filter, Instrumentation Signal Conditioning, Sample-and-Hold Interface.

📊

Precision ADC Input Buffer

The AD746JR fits between a high-impedance source and the sampling input of a 12-bit or 14-bit ADC because its 500 ns settling to 0.01% and 75 V/µs slew rate reduce acquisition errors. Place one channel ahead of the converter input and use the second channel for a reference buffer when channel matching matters. The 13 MHz gain-bandwidth product provides useful closed-loop margin at moderate gains, while the JFET input stage avoids the higher bias current associated with bipolar transistor inputs. Confirm converter acquisition time, input capacitance, and sampling kickback before finalizing the feedback network.

🎛️

High-Speed DAC Output Buffer

The AD746JR can buffer the output of a 12-bit or 14-bit DAC where fast settling and low distortion are required. Its 500 ns settling to 0.01% and 0.0001% total harmonic distortion help preserve converter-code accuracy and reduce distortion in analog signal paths. The dual-channel implementation can drive two related DAC outputs while benefiting from the close AC matching inherent in a monolithic die. Isolate the amplifier from the DAC with the resistor value recommended by the converter manufacturer, and confirm output swing and capacitive-load stability for the chosen gain configuration.

🎧

Active Audio Preamplifier

The AD746JR is appropriate for low-noise audio preamplification because its BiFET input stage supports high input impedance and its 0.0001% total harmonic distortion keeps harmonic products low. The 13 MHz gain-bandwidth product provides more bandwidth than many general-purpose audio amplifiers, allowing moderate-gain stages to retain phase margin and accurate frequency response. The two channels can process stereo signals with close matching, but common-mode range and output-swing limits must be checked at the lowest supply voltage used in portable or battery-powered equipment.

📡

Low-Frequency Active Filter

The AD746JR is well suited to precision active-filter stages because its 13 MHz gain-bandwidth product, 75 V/µs slew rate, and close DC characteristics support accurate gain and phase control. The amplifier can implement low-pass, high-pass, or band-pass sections with external resistors and capacitors, provided the loop gain and phase margin remain adequate at the highest operating frequency. Its rapid settling also makes it useful in switched-capacitor and sampled-data interfaces where accumulated delay would otherwise degrade system timing. Verify resistor ratios, capacitor tolerance, and common-mode headroom in the final filter design.

🏭

Instrumentation Signal Conditioning

The AD746JR can condition outputs from sensors, strain gauges, or laboratory probes when high input impedance, low distortion, and rapid settling are important. The BiFET input stage avoids loading weak sources, while the dual arrangement allows one channel to amplify a measurement and the other to generate or buffer a reference. The device is particularly useful where 12-bit or 14-bit measurement resolution is targeted without requiring a rail-to-rail amplifier. Confirm the sensor output range against the input common-mode limits and maintain symmetrical layout around both channels to preserve matching.

🧩

Sample-and-Hold Interface

The AD746JR can serve as a buffer around a sample-and-hold stage or between a switching node and a downstream converter when fast settling is essential. Its 500 ns response to 0.01% reduces the time required after each acquisition, and its 75 V/µs slew rate allows it to reproduce moderate-amplitude steps with limited distortion. The JFET input stage also presents low bias current to the sampling network, which is valuable when the source impedance is high. Check the hold-capacitor droop, switch feedthrough, amplifier input bias, and settling tolerance as a complete time-domain error budget.

What is the AD746JR?
The AD746JR is a dual precision BiFET operational amplifier manufactured by Analog Devices in an 8-pin SOIC package. According to the Analog Devices AD746 datasheet, the device contains two AD744 amplifier circuits on one monolithic die, providing a 13 MHz gain-bandwidth product, 75 V/µs slew rate, and close AC and DC channel matching. It is intended for precision buffering, filtering, instrumentation, and audio signal-conditioning applications.
What are the key specifications of AD746JR that engineers should know?
The AD746JR provides 13 MHz gain-bandwidth product, 75 V/µs slew rate, ±4.5 V to ±18 V supply operation, and 500 ns settling to 0.01%. The Analog Devices AD746 datasheet also specifies 0.0001% total harmonic distortion. These figures place the device between general-purpose JFET-input amplifiers and precision high-speed amplifiers, making it useful where fast settling and low distortion are more important than rail-to-rail operation.
What is the settling time of the AD746JR?
The AD746JR settles to within 0.01% in 500 ns for a single-pole response. According to the Analog Devices AD746 datasheet, this rapid settling behavior allows the amplifier to be used as a buffer for 12-bit and 14-bit DACs and ADCs. Actual circuit settling can be longer when the closed-loop gain, feedback network, load capacitance, or required final accuracy differs from the datasheet conditions.
Where can I download the AD746JR datasheet PDF?
The official AD746JR datasheet PDF is available from the Analog Devices product page and the manufacturer data-sheet link listed on this page. It documents the electrical characteristics, pin configuration, application information, settling behavior, distortion, and recommended operating conditions for the AD746 family. Use the manufacturer document for design sign-off because distributor listings can abbreviate or omit important test conditions.
Where can I find the AD746JR pinout?
The AD746JR pinout is shown in the pin-description table of the Analog Devices AD746 datasheet. This 8-pin SOIC device uses the standard dual-amplifier arrangement: pins 1 and 7 are the two outputs, pins 2 and 6 are inverting inputs, pins 3 and 5 are non-inverting inputs, pin 4 connects to the negative supply, and pin 8 connects to the positive supply.
What is the difference between AD746JR and AD746JRZ?
The AD746JR and AD746JRZ are both 8-pin SOIC versions of the AD746 dual BiFET amplifier, with the AD746JRZ identified as a lead-free ordering option in cross-reference documentation. They use the same amplifier functions and package pin arrangement. When substituting one for the other, confirm the required terminal finish, temperature grade, and orderable configuration against the current Analog Devices ordering guide before releasing a production build.
What can replace the AD746JR?
The closest drop-in choices include the AD746JRZ and related AD74x dual-amplifier devices in the same 8-pin SOIC footprint. For a cross-brand option, the TL072IDT uses the same dual JFET-input topology and SOIC-8 outline, but its gain-bandwidth product and precision specifications are lower than those of the AD746JR. Verify pin assignment, supply range, offset, noise, and settling requirements before substituting.
Is the TL072IDT the same as the AD746JR?
The TL072IDT is not electrically identical to the AD746JR. Both are dual JFET-input operational amplifiers in an 8-pin SOIC package, but the AD746JR offers a 13 MHz gain-bandwidth product, 75 V/µs slew rate, and 500 ns settling to 0.01%. Use the TL072IDT only when its own bandwidth, distortion, input bias, offset, and output-drive characteristics satisfy the original circuit requirements.
When should I choose AD746JR over AD745JR-16?
Choose the AD746JR when the design benefits from its 13 MHz gain-bandwidth product, 75 V/µs slew rate, and 500 ns settling to 0.01%. The AD745JR-16 is a related precision dual amplifier with a lower bandwidth rating, so the AD746JR provides more margin in wider-band filters or faster ADC and DAC buffering. For narrow-band precision stages where the lower-bandwidth part is sufficient, both devices share the same 8-pin SOIC footprint.
Is AD746JR suitable for precision ADC and DAC buffering?
Yes, the AD746JR is suitable for precision ADC and DAC buffering because the Analog Devices AD746 datasheet identifies its 500 ns settling to 0.01% as appropriate for 12-bit and 14-bit converters. Verify the required settling interval, capacitive load drive, output swing, noise, and offset against the converter specifications. Feedback isolation may be needed when driving an ADC sampling input directly.
Can AD745JR-16 replace an AD746JR in an existing PCB?
The AD745JR-16 can fit the same 8-pin SOIC outline as the AD746JR, but it is a lower-bandwidth member of the AD74x family and may not preserve the original circuit's 13 MHz performance. Treat it as a conditionally compatible substitute: confirm pinout, supply range, input common-mode range, offset, noise, stability, and required closed-loop gain before using it as a drop-in replacement.
What is the best Analog Devices equivalent for AD746JR?
The AD746JRZ is the most direct Analog Devices ordering alternative because it retains the AD746 dual BiFET amplifier design in the same 8-pin SOIC package. It is listed as a compatible replacement with consistent terminals and package configuration. Confirm lead-free finish, temperature range, and qualification status for the intended assembly before treating the substitution as production-ready.
Where can I buy AD746JR online?
Use the Request a Quote form on this page to ask for AD746JR availability, current unit pricing, and scheduled shipment. The quote team can confirm whether the 8-pin SOIC configuration is available for your required quantity and packaging format. Provide your target quantity, date code requirements, and destination country so the response can reflect an actionable order proposal.
What is the price of AD746JR?
Current AD746JR pricing depends on quantity, supplier inventory, date code, and packaging requirements, so it should be confirmed for the specific order. Submit the Request a Quote form on this page with your required quantity and delivery expectations. The quote response will provide the current commercial terms without relying on an outdated catalog figure.
What is the lead time for AD746JR and is the part in stock?
Current stock and lead time for AD746JR depend on the requested quantity, date code, and package configuration. Request a Quote on this page for a current availability check and lead-time estimate. For production planning, state your required delivery date and whether any lot-date traceability is necessary so the supply commitment can be matched to the build schedule.

के लिए इंजीनियरिंग संदर्भ डेटा AD746JR — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the AD746JR when the design needs a dual precision BiFET amplifier with 13 MHz gain-bandwidth product, 75 V/µs slew rate, and 500 ns settling to 0.01%. It is particularly attractive for buffering 12-bit or 14-bit converters, low-frequency active filters, and audio paths where distortion must remain below 0.0001%. Select the AD746JRZ when the same electrical configuration and SOIC-8 layout are needed with a lead-free ordering finish.

Use the AD745JR-16 or AD743JR-16 only when their lower speed is acceptable and the common package reduces redesign effort. The TL072IDT is a cross-brand option for conventional low-frequency dual JFET stages, but its 3 MHz gain-bandwidth product leaves substantially less margin for fast-settling applications. For any substitution, verify the pin description, common-mode range, output swing, offset, bias current, noise, load drive, and closed-loop stability rather than relying on package shape alone.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद AD746JRZ AD745JR-16 AD743JR-16 AD744JR TL072IDT
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Texas Instruments
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Input Stage BiFET BiFET BiFET BiFET BiFET JFET
Channel Count 2 2 2 2 1 2

मुख्य विशेषताएँ

  • Faster speed than the lower-bandwidth AD74x family (बनामAD743JR-16)
  • Higher gain-bandwidth product for wide-band filtering (बनामTL072IDT)
  • Fast 0.01% settling for converter interfaces (बनामTL072IDT)
  • Monolithic dual-channel matching (बनामAD744JR)

डिज़ाइन नोट्स

Place the supply-decoupling capacitor close to pin 8 and connect pin 4 to the ground or supply-return plane with a short, low-impedance path. Keep the two amplifier channels on the same side of the analog signal flow where matching matters, and provide identical input and feedback networks where channel-to-channel tracking is important. Route sensitive input traces away from switching-regulator outputs, digital clock lines, and high-current return paths.

Do not treat the SOIC-8 outline as proof of electrical interchangeability. Confirm the pin description for every substitute, especially input and output assignments across both amplifiers. Also check the common-mode range at the lowest supply voltage, output swing into the intended load, offset and bias-current limits, and closed-loop stability. An amplifier can fit the same PCB land pattern while still changing system accuracy or noise performance.

The 500 ns settling specification applies to a defined small-signal condition and does not guarantee final accuracy for large steps or capacitive loads. For ADC and DAC interfaces, include amplifier slew time, feedback-network delay, sampling kickback, and converter acquisition time in the timing budget. If the amplifier drives a sampling capacitor directly, evaluate isolation-resistor and compensation methods rather than relying on the bandwidth rating alone.

Use a supply arrangement that keeps the total voltage and polarity within the manufacturer's operating limits. Decoupling requirements become more important when the AD746JR drives long feedback traces or high-capacitance nodes, because extra loop delay can reduce phase margin. For dual-supply systems, provide adequate bypass capacitance on each rail rather than relying on a single bulk capacitor to suppress high-frequency transients.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The AD746JR is a general-purpose precision analog amplifier; automotive qualification is not indicated for this ordering code. Confirm terminal-finish and material-compliance documentation with Analog Devices for the exact production configuration.

डेटा सत्यापन तिथि: 2026-11-18 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

AD746JR datasheet AD746JR datasheet pdf AD746JR pinout AD746JR specifications AD746JR equivalent AD746JR replacement AD746JR drop-in substitute AD746JR vs AD746JRZ AD746JR vs TL072IDT AD746JR SOIC-8 amplifier AD746JR ADC DAC buffer AD746JR active filter AD746JR price and stock Analog Devices AD746JR AD746JR schematic pin assignment

संबंधित कंपोनेंट्स और शब्द

Analog Devices AD746JR AD746JRZ AD745JR-16 AD743JR-16 AD744JR TL072IDT AD744 amplifier core dual operational amplifier precision op amp voltage-feedback amplifier BiFET input stage JFET input transistor gain-bandwidth product slew rate settling time total harmonic distortion low-dropout regulator active filter ADC input buffer DAC output buffer audio preamplifier SOIC-8 package surface-mount package
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें