LM2902WYPT - 1.3MHz Quad Op Amp | STMicroelectronics
MPN: LM2902WYPT ✓ सक्रियLM2902WYPT अवलोकन
An operational amplifier, or op amp, is a high-gain analog building block used to amplify voltage differences, buffer sensors, drive loads, and implement feedback-control loops. The LM2902 belongs to the broader operational amplifier hierarchy, where four internally compensated amplifiers are integrated into one package to reduce component count in industrial, automotive, and instrumentation systems. Its push-pull output stage supports a variety of low- and mid-frequency signal-conditioning applications.
Key electrical characteristics include a 1.3 MHz gain-bandwidth product, 100 dB large-signal voltage gain, 375 uA supply current per amplifier, 20 nA low input bias current, and 2 nA low input-offset current. The 800 V ESD protection rating helps improve handling robustness, while the wide supply range supports circuits operating from industrial control, test, measurement, and vehicle-related power systems.
The LM2902 architecture provides four independent high-gain amplifiers with internal frequency compensation. This simplifies PCB layout because external compensation networks are not required. The common-mode input range includes the negative supply rail, making the device useful in single-supply sensor interfaces where signals remain close to ground. The wide input bias-voltage range also supports bipolar input stages within the device.
Typical uses include four-channel sensor amplification, low-frequency active filtering, transducer interfacing, current monitoring, sample-and-hold signal conditioning, and general-purpose analog control. The device can also provide independent amplifier sections for comparators, waveform conditioners, and audio or communications interface circuits when the bandwidth and slew-rate requirements remain modest.
For layout, place input and feedback components close to their associated amplifier pins and keep sensitive input traces away from high-current switching paths. Because the LM2902 is intended primarily for low-frequency precision-oriented applications, verify bandwidth, output swing, load capability, noise, and input-offset requirements against the actual signal path. Stable feedback design is essential because the amplifiers are internally compensated.
This product page combines the manufacturer device information with practical engineering guidance for single- and dual-supply implementation, application analysis, package considerations, and drop-in replacement evaluation. It is intended to help engineers select the LM2902WYPT for general-purpose four-amplifier designs and to identify what must be checked before PCB-level substitution.
के लिए ड्रॉप-इन विकल्प LM2902WYPT — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं LM2902WYPT (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Gain-Bandwidth Product, Amplifier Type, Number of Amplifiers, Product Type.
LM2902YPT
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →LM2902PWRG3
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →LM2902WYPT Maximum Ratings और Electrical Characteristics
| Amplifier Count | 4 amplifiers |
| Product Type | Low-power quad operational amplifier |
| Gain-Bandwidth Product | 1.3 MHz |
| Large-Signal Voltage Gain | 100 dB |
| Supply Current per Amplifier | 375 uA |
| Input Bias Current | 20 nA |
| Input Offset Current | 2 nA |
| ESD Protection | 800 V |
| Single-Supply Operating Range | Up to 30 V |
| Dual-Supply Operating Range | Up to ±15 V |
| Input Common-Mode Voltage Range | Includes the negative supply rail |
| Frequency Compensation | Internal |
| Output Stage | Push-pull |
| पैकेज | 14-TSSOP |
| Package Width | 4.40 mm |
| माउंटिंग प्रकार | Surface mount |
LM2902WYPT 4.40 mm पिन कॉन्फ़िगरेशन गाइड
LM2902WYPT (4.40 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LM2902WYPT.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
LM2902WYPT के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Signal Conditioning, Automotive Control Circuit Amplification, Active Low-Frequency Filters, Current Monitoring and Control Loops, Test and Measurement Buffering, Audio and Communications Interface Circuits.
Industrial Sensor Signal Conditioning
The LM2902WYPT fits four-channel industrial sensor interfaces because it combines four independent amplifiers with an input common-mode range that includes the negative supply rail. This helps process signals from pressure, temperature, and position sensors that operate near ground. With a 1.3 MHz gain-bandwidth product and 375 uA supply current per amplifier, it provides useful bandwidth without imposing a high power budget. Use each section for gain, buffering, or active filtering, and verify input offset, output swing, noise, and operating-temperature requirements against the sensor interface.
अनुशंसित
Automotive Control Circuit Amplification
The LM2902WYPT is suitable for automotive and industrial control circuits that need several low-frequency analog channels in one package. The STMicroelectronics device provides four internally compensated high-gain amplifiers, a 1.3 MHz gain-bandwidth product, and operation across single supplies up to 30 V. That combination supports conditioning of resistive, inductive, and voltage-based sensor signals while reducing board area. The circuit must remain within the verified supply and common-mode limits, and the automotive qualification status should be confirmed for each production order code.
अनुशंसित
Active Low-Frequency Filters
The LM2902WYPT can implement several active-filter stages because it contains four independent, internally compensated amplifiers with a 1.3 MHz gain-bandwidth product. SECTIONS can form low-pass, high-pass, band-pass, or notch networks when component tolerances and closed-loop gain are selected carefully. The 375 uA supply current per amplifier is useful in compact multi-filter modules, while the push-pull output stage supports standard feedback configurations. Confirm slew rate, output-current capability, and stability margins before selecting component values for the intended signal bandwidth.
अनुशंसित
Current Monitoring and Control Loops
The LM2902WYPT is appropriate for current-monitoring and slow feedback-control circuits that need several amplifier channels sharing one package. Its 100 dB large-signal voltage gain and 1.3 MHz gain-bandwidth product provide useful open-loop performance for gain-of-10 or lower analog stages, while internal frequency compensation avoids external compensation networks. The four channels can amplify a current-sense signal, condition a reference, compare a threshold, and buffer a control output. Verify the input offset current of 2 nA, output swing, and response time against the control-loop accuracy and stability requirements.
अनुशंसित
Test and Measurement Buffering
The LM2902WYPT can provide active buffering, gain, and differential-to-single-ended stages in test and measurement equipment. Four independent channels reduce the number of amplifier packages needed when routing several low-frequency signals through a common analog section. Its 375 uA supply current per amplifier is suitable for compact portable or embedded test systems, and the negative-rail-inclusive common-mode input range supports circuits that reference ground. Before using it with high-accuracy or high-impedance probes, verify input bias current, offset voltage, input capacitance, and output settling requirements.
अनुशंसित
Audio and Communications Interface Circuits
The LM2902WYPT can handle low-frequency audio and communications interface functions such as input buffering, active gain, impedance conversion, and channel mixing. Its 1.3 MHz gain-bandwidth product covers many voice-band and control-signal tasks, while the push-pull output stage supports common feedback networks. Four channels allow a compact implementation of a two-channel audio preamplifier plus auxiliary buffering or filtering functions. Audio designs should also check noise, output swing, slew rate, channel matching, and the system load, because bandwidth alone does not determine full signal quality.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा LM2902WYPT — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | LM2902YPT | LM2902PW |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | Texas Instruments |
| Package | 14-TSSOP | 14-TSSOP | 14-TSSOP |
| Amplifier Count | 4 amplifiers | 4 amplifiers | 4 amplifiers |
मुख्य विशेषताएँ
- Four integrated amplifier channels with internal compensation (बनामLM2902PW)
- Wide single- and dual-supply operating capability (बनामLM2902YPT)
- Ground-referenced input capability (बनामLM2902PW)
डिज़ाइन नोट्स
Place each amplifier's input, feedback, and decoupling connections close to the associated TSSOP pins. Keep high-impedance input traces short, avoid routing them beneath digital or switching-current paths, and use a continuous ground plane. The LM2902 has four independent amplifier sections, so assign and route each channel consistently to prevent feedback from one signal path from coupling into another.
Do not assume that every LM2902 package variant is a mechanical replacement. The target uses a 14-TSSOP package, while other ordering codes in the family can use different lead styles or temperature options. Compare the manufacturer pin table, footprint dimensions, exposed-pad requirements, and ordering information before replacing a populated board. For new layouts, verify input offset, common-mode limits, output swing, and load drive under the actual supply voltage.
Decouple the supply pins locally with ceramic capacitance selected using the stability and transient-response requirements in the manufacturer datasheet. Estimated: four amplifiers operating at 375 uA each draw approximately 1.5 mA total, excluding the load currents driven through the output stages. This arithmetic estimate does not include input bias current, output-current demand, or supply ripple, so verify the regulator and capacitor design against the complete loaded circuit.
अनुपालन जानकारी
The device is designed for automotive and industrial control applications, but the exact orderable MPN's environmental declarations and AEC-Q100 qualification status were not stated. Request current compliance documentation when required.