MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices
MPN: MAX202ECSE+TG068 ✓ فعالMAX202ECSE+TG068 جائزہ
An RS-232 transceiver is an interface IC that combines differential signal translation between single-ended logic and RS-232 levels with the electrical isolation required at a communications port. Within the product hierarchy, MAX202ECSE+TG068 is a line driver and receiver, an interface transceiver, and ultimately a semiconductor designed for reliable point-to-point data transmission.
The primary electrical features include two transmit channels, two receive channels, operation from a single 4.5 V to 5.5 V supply, and 15 kV ESD protection. The MAX202E family also emphasizes low power consumption and high-speed transmission, making it suitable for embedded control systems, industrial equipment, and legacy data ports that must exchange serial data over longer cables than logic-level interfaces permit.
The MAX202E implementation includes the charge-pump circuitry required to generate RS-232 transmit voltage levels. This integrated approach avoids external voltage-conversion components and simplifies board layout. Nevertheless, system designers must still account for the non-isolated nature of the interface, provide suitable bypass capacitance, and connect unused driver inputs and receiver outputs to defined logic levels where required.
Typical applications include RS-232 links in industrial controllers, test equipment, point-of-sale terminals, service interfaces, and embedded systems. The two-driver and two-receiver arrangement supports full-duplex communication when two transmitters and two receivers are connected across a communications link. Its 16-SOIC package also allows reuse of the same board footprint across several MAX202 family ordering variants.
For PCB design, place the device close to the connector and route protected and unprotected circuitry according to the manufacturer’s pin-description table and application circuit. Keep switching-node and high-energy transient paths away from receiver inputs, provide the required local bypass capacitors, and verify that the selected cable, connector, and grounding strategy meet the intended RS-232 application.
This page organizes the available ordering information, package details, functional characteristics, practical applications, and same-family drop-in alternatives into an engineering-focused guide for selecting and implementing the MAX202ECSE+TG068.
کے لیے ڈراپ اِن متبادل MAX202ECSE+TG068 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MAX202ECSE+TG068 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Transceiver Configuration, ESD Protection, Supply Voltage, Charge Pump.
MAX202ECSE+
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX202ESE+
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MAX202ESE+T
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
MAX202ESE-TG068
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MAX202ECSE+T
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →MAX202ECSE+TG068 تفصیلات
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Transceiver Configuration | 2/2 full RS-232 |
| Supported Protocol | RS-232 |
| Supply Voltage Range | 4.5 V to 5.5 V |
| ESD Protection | 15 kV |
| پیکیج | 16-SOIC, 0.154 in x 3.90 mm width |
| Packaging | Tape and reel |
| ماؤنٹنگ ٹائپ | Surface mount |
| پنز کی تعداد | 16 |
| Driver Output Count | 2 |
| Receiver Input Count | 2 |
| Communication Mode | Full duplex |
| Operating Voltage | 4.5 V to 5.5 V |
MAX202ECSE+TG068 16-soic, 0.154 in x 3.90 mm width پن کنفیگریشن گائیڈ
MAX202ECSE+TG068 (16-soic, 0.154 in x 3.90 mm width پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MAX202ECSE+TG068.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
MAX202ECSE+TG068 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Controller RS-232 Port, Test and Measurement Equipment, Embedded Service Interface, Point-of-Sale Terminal, Network Equipment Management Port, Low-Voltage Data Acquisition Unit.
Industrial Controller RS-232 Port
The MAX202ECSE+TG068 suits an industrial controller that must communicate with legacy equipment over RS-232. Its two drivers and two receivers support a full-duplex link, while the 4.5 V to 5.5 V supply range is compatible with a conventional 5 V control rail. The 15 kV ESD protection adds an important protection layer at an exposed connector boundary. Place the transceiver near the connector, route the protected interface through the driver and receiver pins, and keep unrelated switching circuitry away from the interface. Verify operating temperature, isolation strategy, grounding, and cable length before approving the design.
تجویز کردہ
Test and Measurement Equipment
The MAX202ECSE+TG068 is appropriate for test equipment that needs a compact, protected serial control or data port. Two RS-232 transmit channels and two receive channels support full-duplex command and response traffic, while the 16-SOIC package preserves board area. The device's stated 15 kV ESD protection is useful when users connect external cables, although it does not replace correct chassis grounding, surge protection, or isolation. Follow the Analog Devices application circuit for bypass capacitors and charge-pump routing, and test the complete cable, connector, and host interface under the intended switching conditions.
تجویز کردہ
Embedded Service Interface
The MAX202ECSE+TG068 can provide a service connection for an embedded controller, programmable controller, or industrial embedded system. The 2/2 channel arrangement allows command output and response input on one port, while the low-power, high-speed characteristics of the MAX202E family align with compact embedded equipment. Use the 4.5 V to 5.5 V operating range to establish a robust supply design and follow the manufacturer pin table for enable and unused-pin states. Because RS-232 is not galvanically isolated, include isolation or common-mode protection when the connected equipment can sit at a different ground potential.
تجویز کردہ
Point-of-Sale Terminal
A point-of-sale terminal or peripheral can use the MAX202ECSE+TG068 for a two-channel full-duplex RS-232 connection to a printer, scanner, or customer display interface. The integrated drivers and receivers reduce the number of discrete interface components, while the 16-SOIC package supports automated board assembly. The 15 kV ESD rating is particularly relevant around cables that users may connect and disconnect. Position the transceiver near the connector, maintain the recommended bypass layout, and route chassis or surge currents away from logic ground. Confirm signal levels, baud rate, and cable length against the connected peripheral specification.
تجویز کردہ
Network Equipment Management Port
The MAX202ECSE+TG068 can implement an RS-232 management or console port on network and communications equipment. The two transmit and two receive channels support full-duplex console traffic, and the single 4.5 V to 5.5 V supply range simplifies connection to a 5 V equipment rail. The integrated charge-pump function allows the transceiver to generate RS-232 levels without external level-shifting components. Position the IC near the serial connector and apply the manufacturer's bypass and routing recommendations. Use a common-mode solution when the console host is electrically isolated or connected through a long cable.
تجویز کردہ
Low-Voltage Data Acquisition Unit
The MAX202ECSE+TG068 can serve as the host-side RS-232 interface in a low-voltage data-acquisition unit. A 4.5 V to 5.5 V operating range fits regulated 5 V systems, and the two-driver, two-receiver arrangement accommodates bidirectional commands and measurements. Its 15 kV ESD protection is valuable when the unit is used in a laboratory or industrial setting with frequently connected cables. Follow the MAX202E application circuit for bypass capacitors and keep the interface return path within the equipment grounding design. Validate the maximum data rate, input thresholds, and cable length before selecting it for a particular acquisition protocol.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا MAX202ECSE+TG068 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | MAX202ECSE+ | MAX202ESE+ | MAX202ESE+T | MAX202ESE-TG068 | MAX202ECSE+T |
|---|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Drivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Receivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Protocol | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 |
| ESD Protection | 15 kV | 15 kV | 15 kV | 15 kV | 15 kV | 15 kV |
| Communication Mode | Full duplex | Full duplex | Full duplex | Full duplex | Full duplex | Full duplex |
اہم امتیازی خصوصیات
- Exact TG068 tape-and-reel ordering configuration (بمقابلہMAX202ESE-TG068)
- Two-channel full-duplex RS-232 interface (بمقابلہMAX202ECSE+)
- Consistent 16-SOIC footprint within the MAX202E family (بمقابلہMAX202ESE+T)
ڈیزائن نوٹس
Follow the Analog Devices MAX202E application circuit for input and output bypass-capacitor placement, and keep the device close to the RS-232 connector. Separate connector-side transient paths from sensitive logic and clock routing. The package's exposed charge-pump and interface functions require careful grounding, so follow the manufacturer footprint and pin-description table rather than substituting a generic SOIC-16 land pattern without checking exposed-pad and lead details.
Do not assume the E, C, +T, or TG068 suffix has no functional consequence. Confirm lead finish, temperature grade, packing method, and orderable status in the Analog Devices ordering table before approving a substitution. Unused driver inputs and receiver outputs should be assigned definite logic states according to the manufacturer guidance, and the 4.5 V to 5.5 V supply range must be maintained during normal operation and cable transients.
RS-232 is a single-ended interface, so ground offsets and cable transients can affect receiver reliability even when the IC provides 15 kV ESD protection. Use a controlled return path, appropriate connector grounding, and system-level surge or isolation measures where required. Place the transceiver near the connector and avoid sharing high-current return paths between the interface and sensitive logic. Validate the completed assembly against the intended cable length and grounding topology.
تعمیل کی معلومات
The MAX202 family is intended for RS-232 and V.28 communications. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code, so those fields remain unknown.