Analog Devices

MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices

Teilenummer: MAX202ECSE+TG068 ✓ Aktiv
4.5 V to 5.5 V Vdss 16-SOIC, 0.154 in x 3.90 mm width Package
MOQ: 1 |

MAX202ECSE+TG068 Übersicht

Analog Devices MAX202ECSE+TG068 is a 2/2 RS-232 transceiver with two drivers and two receivers, a 4.5 V to 5.5 V supply range, 15 kV ESD protection, and a 16-SOIC package supplied in tape-and-reel packaging. The MAX202E family is designed for RS-232 and V.28 links in equipment exposed to electrically harsh environments.

An RS-232 transceiver is an interface IC that combines differential signal translation between single-ended logic and RS-232 levels with the electrical isolation required at a communications port. Within the product hierarchy, MAX202ECSE+TG068 is a line driver and receiver, an interface transceiver, and ultimately a semiconductor designed for reliable point-to-point data transmission.

The primary electrical features include two transmit channels, two receive channels, operation from a single 4.5 V to 5.5 V supply, and 15 kV ESD protection. The MAX202E family also emphasizes low power consumption and high-speed transmission, making it suitable for embedded control systems, industrial equipment, and legacy data ports that must exchange serial data over longer cables than logic-level interfaces permit.

The MAX202E implementation includes the charge-pump circuitry required to generate RS-232 transmit voltage levels. This integrated approach avoids external voltage-conversion components and simplifies board layout. Nevertheless, system designers must still account for the non-isolated nature of the interface, provide suitable bypass capacitance, and connect unused driver inputs and receiver outputs to defined logic levels where required.

Typical applications include RS-232 links in industrial controllers, test equipment, point-of-sale terminals, service interfaces, and embedded systems. The two-driver and two-receiver arrangement supports full-duplex communication when two transmitters and two receivers are connected across a communications link. Its 16-SOIC package also allows reuse of the same board footprint across several MAX202 family ordering variants.

For PCB design, place the device close to the connector and route protected and unprotected circuitry according to the manufacturer’s pin-description table and application circuit. Keep switching-node and high-energy transient paths away from receiver inputs, provide the required local bypass capacitors, and verify that the selected cable, connector, and grounding strategy meet the intended RS-232 application.

This page organizes the available ordering information, package details, functional characteristics, practical applications, and same-family drop-in alternatives into an engineering-focused guide for selecting and implementing the MAX202ECSE+TG068.

Drop-in-Alternativen für MAX202ECSE+TG068 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MAX202ECSE+TG068 (gleiche Bauform und Footprint) – abweichend in Package, Transceiver Configuration, ESD Protection, Supply Voltage, Charge Pump.

Analog Devices
Package: 16-pin SOIC, 0.154 inch body width, 3.90 mm body width
Transceiver Configuration: 2/2 full-duplex RS-232 transceiver
Vergleichen mit MAX202ECSE+TG068 →
Maxim Integrated
Package: 16-pin narrow SOIC
Transceiver Configuration: 2/2 full-duplex
ESD Protection: ±15 kV HBM
Vergleichen mit MAX202ECSE+TG068 →
Analog Devices
Package: 16-pin narrow SOIC
Supply Voltage: +5 V
Charge Pump: Integrated
Vergleichen mit MAX202ECSE+TG068 →
Analog Devices
Package: 16-pin SOIC
Supply Voltage: 5 V
Vergleichen mit MAX202ECSE+TG068 →

MAX202ECSE+

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 16-SOIC
Same 2/2 RS-232 architecture and 4.5 V to 5.5 V supply; ordering form differs from the TG068 tape-and-reel configuration by 0% in core electrical ratings

📋 Referenzalternative (nicht im Katalog)

MAX202ESE+

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Analog Devices
📦 16-SOIC
Dual RS-232 transceiver · 2 · 2 · +5 V · In excess of 120 kbps · ±5 V EIA/TIA-232E · Integrated · 0.1 µF

Preis auf Anfrage

Datenblatt ansehen →

MAX202ESE+T

✅ Drop-In
📦 16-SOIC
Same MAX202E 2/2 RS-232 architecture and 4.5 V to 5.5 V supply; packing suffix differs and lead or temperature attributes require verification

📋 Referenzalternative (nicht im Katalog)

MAX202ESE-TG068

✅ Drop-In
Analog Devices
📦 16-SOIC
RS-232 transceiver · 2 driver / 2 receiver · 5 V · In excess of 120 kbps · Plus or minus 5 V · EIA/TIA-232E · 0.1 uF · 16-pin SOIC

Preis auf Anfrage

Datenblatt ansehen →

MAX202ECSE+T

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Maxim Integrated
📦 16-SOIC
RS-232 transceiver · 2/2 full-duplex · 2 · 2 · +5 V · 120 kbit/s · 30 V/µs · ±15 kV HBM

Preis auf Anfrage

Datenblatt ansehen →

MAX202ECSE+TG068 Technische Daten

Number of Drivers 2
Number of Receivers 2
Transceiver Configuration 2/2 full RS-232
Supported Protocol RS-232
Supply Voltage Range 4.5 V to 5.5 V
ESD Protection 15 kV
Gehäuse 16-SOIC, 0.154 in x 3.90 mm width
Packaging Tape and reel
Montageart Surface mount
Anzahl der Pins 16
Driver Output Count 2
Receiver Input Count 2
Communication Mode Full duplex
Operating Voltage 4.5 V to 5.5 V

MAX202ECSE+TG068 16-soic, 0.154 in x 3.90 mm width Pinbelegungsleitfaden

Pinbelegung für MAX202ECSE+TG068 (16-soic, 0.154 in x 3.90 mm width-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für MAX202ECSE+TG068 im 16-soic, 0.154 in x 3.90 mm width-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MAX202ECSE+TG068.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MAX202ECSE+TG068 ist geeignet für 6 Anwendungs: Industrial Controller RS-232 Port, Test and Measurement Equipment, Embedded Service Interface, Point-of-Sale Terminal, Network Equipment Management Port, Low-Voltage Data Acquisition Unit.

🏭

Industrial Controller RS-232 Port

The MAX202ECSE+TG068 suits an industrial controller that must communicate with legacy equipment over RS-232. Its two drivers and two receivers support a full-duplex link, while the 4.5 V to 5.5 V supply range is compatible with a conventional 5 V control rail. The 15 kV ESD protection adds an important protection layer at an exposed connector boundary. Place the transceiver near the connector, route the protected interface through the driver and receiver pins, and keep unrelated switching circuitry away from the interface. Verify operating temperature, isolation strategy, grounding, and cable length before approving the design.

🔧

Test and Measurement Equipment

The MAX202ECSE+TG068 is appropriate for test equipment that needs a compact, protected serial control or data port. Two RS-232 transmit channels and two receive channels support full-duplex command and response traffic, while the 16-SOIC package preserves board area. The device's stated 15 kV ESD protection is useful when users connect external cables, although it does not replace correct chassis grounding, surge protection, or isolation. Follow the Analog Devices application circuit for bypass capacitors and charge-pump routing, and test the complete cable, connector, and host interface under the intended switching conditions.

🧩

Embedded Service Interface

The MAX202ECSE+TG068 can provide a service connection for an embedded controller, programmable controller, or industrial embedded system. The 2/2 channel arrangement allows command output and response input on one port, while the low-power, high-speed characteristics of the MAX202E family align with compact embedded equipment. Use the 4.5 V to 5.5 V operating range to establish a robust supply design and follow the manufacturer pin table for enable and unused-pin states. Because RS-232 is not galvanically isolated, include isolation or common-mode protection when the connected equipment can sit at a different ground potential.

🖥️

Point-of-Sale Terminal

A point-of-sale terminal or peripheral can use the MAX202ECSE+TG068 for a two-channel full-duplex RS-232 connection to a printer, scanner, or customer display interface. The integrated drivers and receivers reduce the number of discrete interface components, while the 16-SOIC package supports automated board assembly. The 15 kV ESD rating is particularly relevant around cables that users may connect and disconnect. Position the transceiver near the connector, maintain the recommended bypass layout, and route chassis or surge currents away from logic ground. Confirm signal levels, baud rate, and cable length against the connected peripheral specification.

🌐

Network Equipment Management Port

The MAX202ECSE+TG068 can implement an RS-232 management or console port on network and communications equipment. The two transmit and two receive channels support full-duplex console traffic, and the single 4.5 V to 5.5 V supply range simplifies connection to a 5 V equipment rail. The integrated charge-pump function allows the transceiver to generate RS-232 levels without external level-shifting components. Position the IC near the serial connector and apply the manufacturer's bypass and routing recommendations. Use a common-mode solution when the console host is electrically isolated or connected through a long cable.

📟

Low-Voltage Data Acquisition Unit

The MAX202ECSE+TG068 can serve as the host-side RS-232 interface in a low-voltage data-acquisition unit. A 4.5 V to 5.5 V operating range fits regulated 5 V systems, and the two-driver, two-receiver arrangement accommodates bidirectional commands and measurements. Its 15 kV ESD protection is valuable when the unit is used in a laboratory or industrial setting with frequently connected cables. Follow the MAX202E application circuit for bypass capacitors and keep the interface return path within the equipment grounding design. Validate the maximum data rate, input thresholds, and cable length before selecting it for a particular acquisition protocol.

What is the MAX202ECSE+TG068?
The MAX202ECSE+TG068 is a 2/2 RS-232 transceiver containing two drivers and two receivers for full-duplex serial communication. According to the Analog Devices MAX202 product page and MAX202E datasheet, it operates from a 4.5 V to 5.5 V supply, provides 15 kV ESD protection, and is supplied in a 16-SOIC package. The TG068 suffix identifies the tape-and-reel ordering configuration.
What are the key specifications of MAX202ECSE+TG068 that engineers should know?
The MAX202ECSE+TG068 provides two RS-232 drivers, two receivers, a 4.5 V to 5.5 V supply range, 15 kV ESD protection, and a 16-SOIC package. According to the Analog Devices MAX202 product page, the MAX202E family is intended for RS-232 and V.28 communications in harsh environments, with low power consumption and high-speed transmission as principal design characteristics.
Where can I download the MAX202ECSE+TG068 datasheet PDF?
The authoritative MAX202 documentation is available through the Analog Devices MAX202 product page at https://www.analog.com/en/products/max202.html. The MAX202ECSE+TG068 uses the MAX202E family documentation and should be checked against the 16-SOIC ordering information. Use the manufacturer pin-description table and application circuit when assigning PCB signals and bypass components.
Where can I find the MAX202ECSE+TG068 pinout?
Use the pin-description table in the Analog Devices MAX202E datasheet to find the complete 16-SOIC pin assignment. The component page identifies the target as a 16-SOIC device, but the individual signal names are not reproduced on the product listing. Confirm power, ground, driver inputs, receiver outputs, charge-pump connections, and enable functions directly against the manufacturer diagram before PCB routing.
What supply voltage does MAX202ECSE+TG068 require?
The MAX202ECSE+TG068 requires a 4.5 V to 5.5 V single supply. According to the MAX202E specifications listed for the 16-SOIC ordering variant, this range supports a conventional 5 V RS-232 interface implementation. The design must maintain the specified voltage under cable loading and transient conditions rather than relying only on a nominal 5 V rail.
How many RS-232 drivers and receivers are in MAX202ECSE+TG068?
The MAX202ECSE+TG068 contains two drivers and two receivers, a 2/2 transceiver configuration. According to the Analog Devices MAX202 family description, the MAX202E family is designed for RS-232 and V.28 communications. Two transmit and two receive channels support a full-duplex interface when the corresponding signal pairs are connected to the opposite equipment.
Is MAX202ECSE+TG068 suitable for industrial equipment?
The MAX202ECSE+TG068 is suitable for RS-232 equipment that benefits from 15 kV ESD protection and a compact 16-SOIC package. The Analog Devices MAX202 family is specifically described for communications in harsh environments. Industrial suitability should still be confirmed against the required operating-temperature range, electromagnetic conditions, isolation strategy, and applicable product qualification requirements.
Does MAX202ECSE+TG068 provide ESD protection?
Yes, the MAX202ECSE+TG068 is listed with 15 kV ESD protection. According to the Mouser product description for the exact ordering code, this protection is a defining feature of the MAX202E family. ESD protection helps improve port survivability, but external surge, cable-length, and grounding conditions still require system-level validation.
Where can I buy MAX202ECSE+TG068 online?
Use the Request a Quote form on this page to request MAX202ECSE+TG068 availability, supported order quantities, and a current quotation. The Request a Quote workflow provides the appropriate commercial response for this exact 16-SOIC, tape-and-reel ordering code and avoids presenting stale marketplace pricing or an unverified stock claim.
What is the price of MAX202ECSE+TG068?
Use the Request a Quote form on this page for the current MAX202ECSE+TG068 quotation and quantity-break information. Pricing can vary with order quantity, packaging, and supply conditions, so a durable commercial answer should be tied to the exact MPN and a current quote request rather than a static price or an unverified listing.
What is the lead time for MAX202ECSE+TG068?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can change with inventory and order scheduling, so an engineer should obtain a schedule for the exact MAX202ECSE+TG068 tape-and-reel configuration before committing the production build, especially when the design has a constrained commissioning date.
Is MAX202ECSE+TG068 in stock?
Request current stock status through the Request a Quote form on this page for the exact MAX202ECSE+TG068 MPN. A distributor listing can indicate that ordering is possible without guaranteeing a particular stock quantity for the tape-and-reel package. Confirm quantity, delivery schedule, and traceable order handling in the quotation response.
What can replace MAX202ECSE+TG068?
The closest supported replacements are same-family MAX202E 16-SOIC ordering variants with the same 2/2 RS-232 architecture, including MAX202ECSE+ and MAX202ESE+T. Compatibility must be confirmed from the manufacturer pinout and ordering table because package suffix changes can alter lead finish, temperature grade, or packing. The listed alternatives are family-level replacements rather than substitutes from another manufacturer.
Can MAX202ECSE+ replace MAX202ECSE+TG068?
MAX202ECSE+ can serve as a same-family replacement when the required package, temperature grade, and delivery format match. The difference is primarily the ordering and packing configuration: MAX202ECSE+TG068 denotes the tape-and-reel version with the specified TG068 ordering code. Verify all suffix-dependent attributes in the Analog Devices ordering table before production substitution.
When should I choose MAX202ECSE+TG068 over a same-family alternative?
Choose MAX202ECSE+TG068 when the design specifically calls for the MAX202ECSE lead-finish configuration and tape-and-reel packaging. Choose MAX202ECSE+ when the alternative ordering code is acceptable and procurement prefers that form. Both retain the same 16-SOIC RS-232 family context, so the decision should focus on exact suffix attributes rather than a change in transceiver function.
MAX202ECSE+TG068 vs MAX202ESE+T: which is better for a new design?
The two parts belong to the same MAX202E family and provide the same core 2/2 RS-232 transceiver role in a 16-SOIC package. MAX202ECSE+TG068 is the tape-and-reel TG068 ordering configuration, while MAX202ESE+T uses a different suffix and packing form. Select the one whose lead finish, temperature grade, packing, and lifecycle records satisfy the production and environmental requirements.

Technische Referenzdaten für MAX202ECSE+TG068 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MAX202ECSE+TG068 when the design requires the specified MAX202ECSE lead-finish configuration and the TG068 tape-and-reel ordering form. Its two drivers, two receivers, 4.5 V to 5.5 V supply range, and 15 kV ESD protection fit full-duplex RS-232 links in industrial, test, embedded, and management-port equipment. MAX202ECSE+ is appropriate when the alternate ordering form is acceptable. MAX202ESE+ and MAX202ESE+T provide the same core MAX202E transceiver function, but suffix-dependent temperature grade, lead finish, packing, and lifecycle attributes must be checked. MAX202ESE-TG068 is the closest same-family alternative when its E-versus-C suffix attributes meet the environmental and procurement requirements. No cross-brand drop-in is recommended without a separate manufacturer pin and parameter comparison. For every candidate, verify the complete manufacturer pinout, operating temperature, capacitance values, and RS-232 performance limits before release.

Vergleich mit Alternativen

Parameter Dieses Produkt MAX202ECSE+ MAX202ESE+ MAX202ESE+T MAX202ESE-TG068 MAX202ECSE+T
Package 16-SOIC 16-SOIC - same 16-SOIC - same 16-SOIC - same 16-SOIC - same 16-SOIC - same
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Drivers 2 2 2 2 2 2
Receivers 2 2 2 2 2 2
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
Protocol RS-232 RS-232 RS-232 RS-232 RS-232 RS-232
ESD Protection 15 kV 15 kV 15 kV 15 kV 15 kV 15 kV
Communication Mode Full duplex Full duplex Full duplex Full duplex Full duplex Full duplex

Wichtigste Unterscheidungsmerkmale

  • Exact TG068 tape-and-reel ordering configuration (vs. MAX202ESE-TG068)
  • Two-channel full-duplex RS-232 interface (vs. MAX202ECSE+)
  • Consistent 16-SOIC footprint within the MAX202E family (vs. MAX202ESE+T)

Designhinweise

Follow the Analog Devices MAX202E application circuit for input and output bypass-capacitor placement, and keep the device close to the RS-232 connector. Separate connector-side transient paths from sensitive logic and clock routing. The package's exposed charge-pump and interface functions require careful grounding, so follow the manufacturer footprint and pin-description table rather than substituting a generic SOIC-16 land pattern without checking exposed-pad and lead details.

Do not assume the E, C, +T, or TG068 suffix has no functional consequence. Confirm lead finish, temperature grade, packing method, and orderable status in the Analog Devices ordering table before approving a substitution. Unused driver inputs and receiver outputs should be assigned definite logic states according to the manufacturer guidance, and the 4.5 V to 5.5 V supply range must be maintained during normal operation and cable transients.

RS-232 is a single-ended interface, so ground offsets and cable transients can affect receiver reliability even when the IC provides 15 kV ESD protection. Use a controlled return path, appropriate connector grounding, and system-level surge or isolation measures where required. Place the transceiver near the connector and avoid sharing high-current return paths between the interface and sensitive logic. Validate the completed assembly against the intended cable length and grounding topology.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The MAX202 family is intended for RS-232 and V.28 communications. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code, so those fields remain unknown.

Daten verifiziert am: 2026-11-09 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MAX202ECSE+TG068 datasheet MAX202ECSE+TG068 specifications MAX202ECSE+TG068 pinout MAX202ECSE+TG068 datasheet pdf Analog Devices MAX202ECSE+TG068 MAX202ECSE+TG068 equivalent MAX202ECSE+TG068 replacement MAX202ECSE+TG068 drop-in substitute MAX202ECSE+TG068 16-SOIC pinout MAX202ECSE+TG068 application circuit MAX202ECSE+TG068 price MAX202ECSE+TG068 stock MAX202ECSE+TG068 vs MAX202ESE+T

Verwandte Bauteile & Begriffe

Analog Devices Maxim Integrated MAX202ECSE+TG068 MAX202ECSE+ MAX202ESE+ MAX202ESE+T MAX202ESE-TG068 MAX202ECSE+T RS-232 V.28 RS-232 transceiver line driver line receiver 2/2 transceiver full duplex 15 kV ESD protection 4.5 V to 5.5 V supply 16-SOIC SOIC package surface mount charge pump tape and reel industrial equipment test equipment
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen