MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices
部品番号: MAX202ECSE+TG068 ✓ 生産中MAX202ECSE+TG068 概要
An RS-232 transceiver is an interface IC that combines differential signal translation between single-ended logic and RS-232 levels with the electrical isolation required at a communications port. Within the product hierarchy, MAX202ECSE+TG068 is a line driver and receiver, an interface transceiver, and ultimately a semiconductor designed for reliable point-to-point data transmission.
The primary electrical features include two transmit channels, two receive channels, operation from a single 4.5 V to 5.5 V supply, and 15 kV ESD protection. The MAX202E family also emphasizes low power consumption and high-speed transmission, making it suitable for embedded control systems, industrial equipment, and legacy data ports that must exchange serial data over longer cables than logic-level interfaces permit.
The MAX202E implementation includes the charge-pump circuitry required to generate RS-232 transmit voltage levels. This integrated approach avoids external voltage-conversion components and simplifies board layout. Nevertheless, system designers must still account for the non-isolated nature of the interface, provide suitable bypass capacitance, and connect unused driver inputs and receiver outputs to defined logic levels where required.
Typical applications include RS-232 links in industrial controllers, test equipment, point-of-sale terminals, service interfaces, and embedded systems. The two-driver and two-receiver arrangement supports full-duplex communication when two transmitters and two receivers are connected across a communications link. Its 16-SOIC package also allows reuse of the same board footprint across several MAX202 family ordering variants.
For PCB design, place the device close to the connector and route protected and unprotected circuitry according to the manufacturer’s pin-description table and application circuit. Keep switching-node and high-energy transient paths away from receiver inputs, provide the required local bypass capacitors, and verify that the selected cable, connector, and grounding strategy meet the intended RS-232 application.
This page organizes the available ordering information, package details, functional characteristics, practical applications, and same-family drop-in alternatives into an engineering-focused guide for selecting and implementing the MAX202ECSE+TG068.
ドロップイン代替品: MAX202ECSE+TG068 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX202ECSE+TG068 (同一形状・フットプリント) — 相違点: Package, Transceiver Configuration, ESD Protection, Supply Voltage, Charge Pump.
MAX202ECSE+
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MAX202ESE+
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MAX202ESE+T
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MAX202ESE-TG068
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX202ECSE+T
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MAX202ECSE+TG068 仕様
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Transceiver Configuration | 2/2 full RS-232 |
| Supported Protocol | RS-232 |
| Supply Voltage Range | 4.5 V to 5.5 V |
| ESD Protection | 15 kV |
| パッケージ | 16-SOIC, 0.154 in x 3.90 mm width |
| Packaging | Tape and reel |
| 実装タイプ | Surface mount |
| ピン数 | 16 |
| Driver Output Count | 2 |
| Receiver Input Count | 2 |
| Communication Mode | Full duplex |
| Operating Voltage | 4.5 V to 5.5 V |
MAX202ECSE+TG068 16-soic, 0.154 in x 3.90 mm width ピン配置ガイド
MAX202ECSE+TG068 (16-soic, 0.154 in x 3.90 mm width パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX202ECSE+TG068.
詳細は データシート をご参照ください。
主な用途
MAX202ECSE+TG068 の用途: 6 件s: Industrial Controller RS-232 Port, Test and Measurement Equipment, Embedded Service Interface, Point-of-Sale Terminal, Network Equipment Management Port, Low-Voltage Data Acquisition Unit.
Industrial Controller RS-232 Port
The MAX202ECSE+TG068 suits an industrial controller that must communicate with legacy equipment over RS-232. Its two drivers and two receivers support a full-duplex link, while the 4.5 V to 5.5 V supply range is compatible with a conventional 5 V control rail. The 15 kV ESD protection adds an important protection layer at an exposed connector boundary. Place the transceiver near the connector, route the protected interface through the driver and receiver pins, and keep unrelated switching circuitry away from the interface. Verify operating temperature, isolation strategy, grounding, and cable length before approving the design.
おすすめ
Test and Measurement Equipment
The MAX202ECSE+TG068 is appropriate for test equipment that needs a compact, protected serial control or data port. Two RS-232 transmit channels and two receive channels support full-duplex command and response traffic, while the 16-SOIC package preserves board area. The device's stated 15 kV ESD protection is useful when users connect external cables, although it does not replace correct chassis grounding, surge protection, or isolation. Follow the Analog Devices application circuit for bypass capacitors and charge-pump routing, and test the complete cable, connector, and host interface under the intended switching conditions.
おすすめ
Embedded Service Interface
The MAX202ECSE+TG068 can provide a service connection for an embedded controller, programmable controller, or industrial embedded system. The 2/2 channel arrangement allows command output and response input on one port, while the low-power, high-speed characteristics of the MAX202E family align with compact embedded equipment. Use the 4.5 V to 5.5 V operating range to establish a robust supply design and follow the manufacturer pin table for enable and unused-pin states. Because RS-232 is not galvanically isolated, include isolation or common-mode protection when the connected equipment can sit at a different ground potential.
おすすめ
Point-of-Sale Terminal
A point-of-sale terminal or peripheral can use the MAX202ECSE+TG068 for a two-channel full-duplex RS-232 connection to a printer, scanner, or customer display interface. The integrated drivers and receivers reduce the number of discrete interface components, while the 16-SOIC package supports automated board assembly. The 15 kV ESD rating is particularly relevant around cables that users may connect and disconnect. Position the transceiver near the connector, maintain the recommended bypass layout, and route chassis or surge currents away from logic ground. Confirm signal levels, baud rate, and cable length against the connected peripheral specification.
おすすめ
Network Equipment Management Port
The MAX202ECSE+TG068 can implement an RS-232 management or console port on network and communications equipment. The two transmit and two receive channels support full-duplex console traffic, and the single 4.5 V to 5.5 V supply range simplifies connection to a 5 V equipment rail. The integrated charge-pump function allows the transceiver to generate RS-232 levels without external level-shifting components. Position the IC near the serial connector and apply the manufacturer's bypass and routing recommendations. Use a common-mode solution when the console host is electrically isolated or connected through a long cable.
おすすめ
Low-Voltage Data Acquisition Unit
The MAX202ECSE+TG068 can serve as the host-side RS-232 interface in a low-voltage data-acquisition unit. A 4.5 V to 5.5 V operating range fits regulated 5 V systems, and the two-driver, two-receiver arrangement accommodates bidirectional commands and measurements. Its 15 kV ESD protection is valuable when the unit is used in a laboratory or industrial setting with frequently connected cables. Follow the MAX202E application circuit for bypass capacitors and keep the interface return path within the equipment grounding design. Validate the maximum data rate, input thresholds, and cable length before selecting it for a particular acquisition protocol.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX202ECSE+TG068 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX202ECSE+ | MAX202ESE+ | MAX202ESE+T | MAX202ESE-TG068 | MAX202ECSE+T |
|---|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Drivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Receivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Protocol | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 |
| ESD Protection | 15 kV | 15 kV | 15 kV | 15 kV | 15 kV | 15 kV |
| Communication Mode | Full duplex | Full duplex | Full duplex | Full duplex | Full duplex | Full duplex |
主な差別化要因
- Exact TG068 tape-and-reel ordering configuration (vs MAX202ESE-TG068)
- Two-channel full-duplex RS-232 interface (vs MAX202ECSE+)
- Consistent 16-SOIC footprint within the MAX202E family (vs MAX202ESE+T)
設計ノート
Follow the Analog Devices MAX202E application circuit for input and output bypass-capacitor placement, and keep the device close to the RS-232 connector. Separate connector-side transient paths from sensitive logic and clock routing. The package's exposed charge-pump and interface functions require careful grounding, so follow the manufacturer footprint and pin-description table rather than substituting a generic SOIC-16 land pattern without checking exposed-pad and lead details.
Do not assume the E, C, +T, or TG068 suffix has no functional consequence. Confirm lead finish, temperature grade, packing method, and orderable status in the Analog Devices ordering table before approving a substitution. Unused driver inputs and receiver outputs should be assigned definite logic states according to the manufacturer guidance, and the 4.5 V to 5.5 V supply range must be maintained during normal operation and cable transients.
RS-232 is a single-ended interface, so ground offsets and cable transients can affect receiver reliability even when the IC provides 15 kV ESD protection. Use a controlled return path, appropriate connector grounding, and system-level surge or isolation measures where required. Place the transceiver near the connector and avoid sharing high-current return paths between the interface and sensitive logic. Validate the completed assembly against the intended cable length and grounding topology.
コンプライアンス情報
The MAX202 family is intended for RS-232 and V.28 communications. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code, so those fields remain unknown.