BTS426L1E3062AAUMA1 vs BTS426L1E3062ABUMA1 Perbandingan
Perbandingan bersamaan detil BTS426L1E3062AAUMA1 dari Infineon dan BTS426L1E3062ABUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Infineon
BTS426L1E3062ABUMA1 - 5.8A 12V Smart High-Side Switch | Infineon
BTS426L1E3062ABUMA1 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | BTS426L1E3062AAUMA1 | BTS426L1E3062ABUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies | — |
| Product Family | Classic PROFET 12V | — |
| Fungsi | Smart High-Side Power Switch | — |
| Topologi | N-Channel Vertical Power FET with Charge Pump | 1:1 N-Channel High-Side |
| Jumlah Output | 1 | — |
| Konfigurasi Output | High-Side | — |
| Typical On-State Resistance (RDS(on)) | 5 mΩ | — |
| Continuous Load Current | 7 A | — |
| Nominal Operating Voltage | 12 V (automotive) | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes (ST pin, ground-referenced feedback) | Yes (status feedback) |
| Embedded Protections | Overload, Thermal Shutdown, Overvoltage Clamp, ESD | — |
| Technology | Smart SIPMOS, monolithic | — |
| Paket | PG-TO263-5-2 (DPAK-5, surface mount) | PG-TO263-5-2 (D2PAK, 4 leads + tab) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] | — |
| Status RoHS | Compliant | — |
| Automotive Qualification | AEC-Q100 (per Classic PROFET 12V family) | AEC-Q100 qualified (PROFET 12V family) |
| Product Type | — | Smart High-Side Power Switch (PROFET) |
| Manufacturer Series | — | Classic PROFET 12V |
| Typical R_DS(on) | — | 5 mΩ |
| Arus Output Maximum | — | 5.8 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | [DATA_NEEDED: Vs operating range] |
| Suhu Kerja | — | -40 °C to +150 °C (TJ) |
| Fault Protection | — | Current Limiting (Fixed), Open Load Detection, Overtemperature, Short Circuit, Overvoltage (load dump), Reverse Battery |
| Lead-Free / RoHS | — | Yes (per distributor listings) |
| Demagnetization | — | Fast (designed for inductive loads) |