BTS426L1E3062AAUMA1 vs BTS426L1E3062ABUMA1 比較
詳細並排比較 BTS426L1E3062AAUMA1 由 Infineon 與 BTS426L1E3062ABUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | BTS426L1E3062AAUMA1 | BTS426L1E3062ABUMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Manufacturer | Infineon Technologies | — |
| Product Family | Classic PROFET 12V | — |
| 功能 | Smart High-Side Power Switch | — |
| 拓撲 | N-Channel Vertical Power FET with Charge Pump | 1:1 N-Channel High-Side |
| 輸出數量 | 1 | — |
| 輸出配置 | High-Side | — |
| Typical On-State Resistance (RDS(on)) | 5 mΩ | — |
| Continuous Load Current | 7 A | — |
| Nominal Operating Voltage | 12 V (automotive) | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes (ST pin, ground-referenced feedback) | Yes (status feedback) |
| Embedded Protections | Overload, Thermal Shutdown, Overvoltage Clamp, ESD | — |
| Technology | Smart SIPMOS, monolithic | — |
| 封裝 | PG-TO263-5-2 (DPAK-5, surface mount) | PG-TO263-5-2 (D2PAK, 4 leads + tab) |
| 安裝類型 | Surface Mount | Surface Mount |
| 工作溫度範圍 | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] | — |
| RoHS 狀態 | Compliant | — |
| Automotive Qualification | AEC-Q100 (per Classic PROFET 12V family) | AEC-Q100 qualified (PROFET 12V family) |
| Product Type | — | Smart High-Side Power Switch (PROFET) |
| Manufacturer Series | — | Classic PROFET 12V |
| Typical R_DS(on) | — | 5 mΩ |
| 最大輸出電流 | — | 5.8 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | [DATA_NEEDED: Vs operating range] |
| 工作溫度 | — | -40 °C to +150 °C (TJ) |
| Fault Protection | — | Current Limiting (Fixed), Open Load Detection, Overtemperature, Short Circuit, Overvoltage (load dump), Reverse Battery |
| Lead-Free / RoHS | — | Yes (per distributor listings) |
| Demagnetization | — | Fast (designed for inductive loads) |