BTS426L1E3062AAUMA1 vs BTS426L1E3062ABUMA1 So sánh

So sánh chi tiết song song của BTS426L1E3062AAUMA1 bằng Infineon và BTS426L1E3062ABUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS426L1E3062AAUMA1 BTS426L1E3062AAUMA1 - 7A 12V Smart High-Side Switch | Infineon

BTS426L1E3062AAUMA1 - 7A 12V Smart High-Side Switch | Infineon

BTS426L1E3062AAUMA1 ✓ Hoạt động
Infineon
BTS426L1E3062ABUMA1 BTS426L1E3062ABUMA1 - 5.8A 12V Smart High-Side Switch | Infineon

BTS426L1E3062ABUMA1 - 5.8A 12V Smart High-Side Switch | Infineon

BTS426L1E3062ABUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS426L1E3062AAUMA1 BTS426L1E3062ABUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Manufacturer Infineon Technologies —
Product Family Classic PROFET 12V —
Chức năng Smart High-Side Power Switch —
Cấu trúc N-Channel Vertical Power FET with Charge Pump 1:1 N-Channel High-Side
Số lượng đầu ra 1 —
Cấu hình đầu ra High-Side —
Typical On-State Resistance (RDS(on)) 5 mΩ —
Continuous Load Current 7 A —
Nominal Operating Voltage 12 V (automotive) —
Input Type CMOS-compatible, ground-referenced —
Diagnostic Output Yes (ST pin, ground-referenced feedback) Yes (status feedback)
Embedded Protections Overload, Thermal Shutdown, Overvoltage Clamp, ESD —
Technology Smart SIPMOS, monolithic —
Hộp PG-TO263-5-2 (DPAK-5, surface mount) PG-TO263-5-2 (D2PAK, 4 leads + tab)
Kiểu lắp đặt Surface Mount Surface Mount
Khoảng nhiệt độ hoạt động -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] —
Trạng thái RoHS Compliant —
Automotive Qualification AEC-Q100 (per Classic PROFET 12V family) AEC-Q100 qualified (PROFET 12V family)
Product Type — Smart High-Side Power Switch (PROFET)
Manufacturer Series — Classic PROFET 12V
Typical R_DS(on) — 5 mΩ
Điện áp tối đa đầu ra — 5.8 A
Nominal Supply Voltage — 12 V
Operating Supply Voltage Range — [DATA_NEEDED: Vs operating range]
Nhiệt độ hoạt động — -40 °C to +150 °C (TJ)
Fault Protection — Current Limiting (Fixed), Open Load Detection, Overtemperature, Short Circuit, Overvoltage (load dump), Reverse Battery
Lead-Free / RoHS — Yes (per distributor listings)
Demagnetization — Fast (designed for inductive loads)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá