BTS5014SDAAUMA1 vs BTS6133DAUMA1 Perbandingan
Perbandingan bersamaan detil BTS5014SDAAUMA1 dari Infineon dan BTS6133DAUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTS5014SDAAUMA1 | BTS6133DAUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 1 | — |
| Topologi | N-Channel vertical power MOSFET with charge pump | — |
| Nominal Load Current | 6 A | — |
| Tegangan Pemuat Kerja | 5 V to 28 V (load-dump tolerant to 41 V) | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | [DATA_NEEDED: RDS(on) at 25C] |
| Standby Current | [DATA_NEEDED: standby current uA] | — |
| Batas Arus | [DATA_NEEDED: ICL typical] | — |
| Rentang Suhu Kerja | -40 C to +150 C (junction) | -40C to +150C |
| Paket | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-5-11 (DPAK-5) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Load Type | Resistive, inductive, capacitive | — |
| Diagnostic Features | Current sense (IS), fault status (ST), open-drain | — |
| Protection Functions | Over-current, over-temperature, over-voltage, ESD | — |
| ESD Protection | [DATA_NEEDED: HBM/CDM rating] | — |
| Status RoHS | Compliant | Compliant |
| Process Technology | Infineon SMART7 | — |
| Manufacturer | — | Infineon Technologies |
| Part Number | — | BTS6133DAUMA1 |
| Technology | — | SIPMOS (N-channel MOSFET with control IC) |
| Switch Configuration | — | 1:1 (single high-side) |
| Jumlah Output | — | 1 |
| Peak Drain Current | — | 41 A |
| Continuous Load Current | — | 8 A |
| Operating Voltage Range | — | [DATA_NEEDED: VBB operating range] |
| Jumlah Pin | — | 5 |
| Protection Features | — | Over-temperature, short-circuit, overload, under-voltage, over-voltage, current limitation |
| Diagnostic Feedback | — | Yes (status / fault pin) |
| Level MSL | — | 3 (per JEDEC J-STD-020, typical for DPAK) |
| AEC-Q100 Qualified | — | AEC-Q100 qualified (automotive grade) |
| Datasheet Document Size | — | 257 Kbytes (15 pages) |