BTS5014SDAAUMA1 vs BTS6133DAUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS5014SDAAUMA1 tarafından Infineon ve BTS6133DAUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTS5014SDAAUMA1 | BTS6133DAUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 1 | — |
| Ağ Yapısı | N-Channel vertical power MOSFET with charge pump | — |
| Nominal Load Current | 6 A | — |
| İşletim Besleme Gerilimi | 5 V to 28 V (load-dump tolerant to 41 V) | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | [DATA_NEEDED: RDS(on) at 25C] |
| Standby Current | [DATA_NEEDED: standby current uA] | — |
| Akım Sınırı | [DATA_NEEDED: ICL typical] | — |
| İşletim Sıcaklığı Aralığı | -40 C to +150 C (junction) | -40C to +150C |
| Paket | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-5-11 (DPAK-5) |
| Montaj Türü | Surface Mount | Surface Mount |
| Load Type | Resistive, inductive, capacitive | — |
| Diagnostic Features | Current sense (IS), fault status (ST), open-drain | — |
| Protection Functions | Over-current, over-temperature, over-voltage, ESD | — |
| ESD Protection | [DATA_NEEDED: HBM/CDM rating] | — |
| RoHS Durumu | Compliant | Compliant |
| Process Technology | Infineon SMART7 | — |
| Manufacturer | — | Infineon Technologies |
| Part Number | — | BTS6133DAUMA1 |
| Technology | — | SIPMOS (N-channel MOSFET with control IC) |
| Switch Configuration | — | 1:1 (single high-side) |
| Çıkış Sayısı | — | 1 |
| Peak Drain Current | — | 41 A |
| Continuous Load Current | — | 8 A |
| Operating Voltage Range | — | [DATA_NEEDED: VBB operating range] |
| Pin Sayısı | — | 5 |
| Protection Features | — | Over-temperature, short-circuit, overload, under-voltage, over-voltage, current limitation |
| Diagnostic Feedback | — | Yes (status / fault pin) |
| MSL Seviyesi | — | 3 (per JEDEC J-STD-020, typical for DPAK) |
| AEC-Q100 Qualified | — | AEC-Q100 qualified (automotive grade) |
| Datasheet Document Size | — | 257 Kbytes (15 pages) |