BTS6133DAUMA1 vs BTS4130QGAXUMA1 Perbandingan
Perbandingan bersamaan detil BTS6133DAUMA1 dari Infineon dan BTS4130QGAXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTS6133DAUMA1 | BTS4130QGAXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Harga Unit (USD) | — | $1,86 |
| Manufacturer | Infineon Technologies | — |
| Part Number | BTS6133DAUMA1 | — |
| Product Type | Smart High-Side Power Switch | Quad Smart High-Side Power Switch |
| Technology | SIPMOS (N-channel MOSFET with control IC) | — |
| Switch Configuration | 1:1 (single high-side) | — |
| Jumlah Output | 1 | — |
| Peak Drain Current | 41 A | — |
| Continuous Load Current | 8 A | — |
| Operating Voltage Range | [DATA_NEEDED: VBB operating range] | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | — |
| Paket | PG-TO252-5-11 (DPAK-5) | PG-DSO-20-32 (20-pin DSO, 7.50 mm width) |
| Jumlah Pin | 5 | — |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | -40C to +150C | -40 C to +150 C junction |
| Protection Features | Over-temperature, short-circuit, overload, under-voltage, over-voltage, current limitation | Current limit, overtemperature shutdown, overvoltage clamp, reverse battery |
| Diagnostic Feedback | Yes (status / fault pin) | — |
| Level MSL | 3 (per JEDEC J-STD-020, typical for DPAK) | 3 (per JEDEC J-STD-020) |
| Status RoHS | Compliant | Compliant |
| AEC-Q100 Qualified | AEC-Q100 qualified (automotive grade) | — |
| Datasheet Document Size | 257 Kbytes (15 pages) | — |
| Number of Channels | — | 4 |
| Topologi | — | High-Side N-Channel MOSFET with charge pump |
| Continuous Load Current per Channel | — | 2.1 A |
| On-State Resistance R_DS(on) per Channel | — | 130 mOhm typical |
| Tegangan Pemuat Kerja | — | 6 V to 18 V (extended to 28 V transient) |
| Overvoltage Clamp (Load Dump) | — | 45 V typical |
| Quiescent Current (Standby) | — | [DATA_NEEDED: quiescent current value] |
| Automotive Qualification | — | AEC-Q100 qualified |
| Diagnostic Output | — | Status feedback pin |