BTS6133DAUMA1 vs BTS4130QGAXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS6133DAUMA1 disebabkan oleh Infineon dan BTS4130QGAXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | BTS6133DAUMA1 | BTS4130QGAXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies | — |
| Part Number | BTS6133DAUMA1 | — |
| Product Type | Smart High-Side Power Switch | Quad Smart High-Side Power Switch |
| Technology | SIPMOS (N-channel MOSFET with control IC) | — |
| Switch Configuration | 1:1 (single high-side) | — |
| Bilangan Output | 1 | — |
| Peak Drain Current | 41 A | — |
| Continuous Load Current | 8 A | — |
| Operating Voltage Range | [DATA_NEEDED: VBB operating range] | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | — |
| Kemasan | PG-TO252-5-11 (DPAK-5) | PG-DSO-20-32 (20-pin DSO, 7.50 mm width) |
| Kiraan Pin | 5 | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Gambaran Suhu Operasi | -40C to +150C | -40 C to +150 C junction |
| Protection Features | Over-temperature, short-circuit, overload, under-voltage, over-voltage, current limitation | Current limit, overtemperature shutdown, overvoltage clamp, reverse battery |
| Diagnostic Feedback | Yes (status / fault pin) | — |
| Aras MSL | 3 (per JEDEC J-STD-020, typical for DPAK) | 3 (per JEDEC J-STD-020) |
| Status RoHS | Compliant | Compliant |
| AEC-Q100 Qualified | AEC-Q100 qualified (automotive grade) | — |
| Datasheet Document Size | 257 Kbytes (15 pages) | — |
| Number of Channels | — | 4 |
| Tetstruktur | — | High-Side N-Channel MOSFET with charge pump |
| Continuous Load Current per Channel | — | 2.1 A |
| On-State Resistance R_DS(on) per Channel | — | 130 mOhm typical |
| Tegangan Pemberi Arus Operasi | — | 6 V to 18 V (extended to 28 V transient) |
| Overvoltage Clamp (Load Dump) | — | 45 V typical |
| Quiescent Current (Standby) | — | [DATA_NEEDED: quiescent current value] |
| Automotive Qualification | — | AEC-Q100 qualified |
| Diagnostic Output | — | Status feedback pin |