BTS6133DAUMA1 vs BTS4130QGAXUMA1 مقایسه
مقایسه دقیق کنار به کنار BTS6133DAUMA1 توسط Infineon و BTS4130QGAXUMA1 توسط Infineon. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | BTS6133DAUMA1 | BTS4130QGAXUMA1 |
|---|---|---|
| برند | Infineon | Infineon |
| دسته‌بندی | Power MOSFET Drivers | Power MOSFET Drivers |
| وضعیت چرخه عمر | فعال | فعال |
| Manufacturer | Infineon Technologies | — |
| Part Number | BTS6133DAUMA1 | — |
| Product Type | Smart High-Side Power Switch | Quad Smart High-Side Power Switch |
| Technology | SIPMOS (N-channel MOSFET with control IC) | — |
| Switch Configuration | 1:1 (single high-side) | — |
| تعداد خروجی‌ها | 1 | — |
| Peak Drain Current | 41 A | — |
| Continuous Load Current | 8 A | — |
| Operating Voltage Range | [DATA_NEEDED: VBB operating range] | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | — |
| بسته‌بندی | PG-TO252-5-11 (DPAK-5) | PG-DSO-20-32 (20-pin DSO, 7.50 mm width) |
| تعداد پایه | 5 | — |
| نوع نصب | Surface Mount | Surface Mount |
| محدوده دمای کاری | -40C to +150C | -40 C to +150 C junction |
| Protection Features | Over-temperature, short-circuit, overload, under-voltage, over-voltage, current limitation | Current limit, overtemperature shutdown, overvoltage clamp, reverse battery |
| Diagnostic Feedback | Yes (status / fault pin) | — |
| سطح MSL | 3 (per JEDEC J-STD-020, typical for DPAK) | 3 (per JEDEC J-STD-020) |
| وضعیت RoHS | Compliant | Compliant |
| AEC-Q100 Qualified | AEC-Q100 qualified (automotive grade) | — |
| Datasheet Document Size | 257 Kbytes (15 pages) | — |
| Number of Channels | — | 4 |
| توپولوژی | — | High-Side N-Channel MOSFET with charge pump |
| Continuous Load Current per Channel | — | 2.1 A |
| On-State Resistance R_DS(on) per Channel | — | 130 mOhm typical |
| ولتاژ تغذیه کاری | — | 6 V to 18 V (extended to 28 V transient) |
| Overvoltage Clamp (Load Dump) | — | 45 V typical |
| Quiescent Current (Standby) | — | [DATA_NEEDED: quiescent current value] |
| Automotive Qualification | — | AEC-Q100 qualified |
| Diagnostic Output | — | Status feedback pin |