BTS740S2XUMA1 vs BTS70402EPGXUMA1 Perbandingan
Perbandingan bersamaan detil BTS740S2XUMA1 dari Infineon dan BTS70402EPGXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTS740S2XUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Part Number | BTS740S2XUMA1 | — |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Fungsi | Dual-channel Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologi | High-Side Switch, 1:1 N-Channel | — |
| Number of Channels | 2 | 4 |
| Output Current per Channel | 4.9 A | — |
| Operating Voltage (Load) | 5 V to 28 V | — |
| Logic Supply Voltage | 3.0 V to 5.5 V | 3.3 V / 5 V compatible MCU I/O |
| Input Type | CMOS-compatible, logic ground isolated | — |
| R_DS(on) per Channel | [DATA_NEEDED: R_DS(on) typical value] | — |
| On-State Resistance (typ, per channel) | [DATA_NEEDED: R_DS(on) typical value] | — |
| Protection Features | Overvoltage, Undervoltage, Overtemperature, Short-circuit, Open-load detection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Demagnetization | Fast active demagnetization for inductive loads | — |
| Diagnostic Output | Yes (open-load, short detection) | — |
| Standby Current | [DATA_NEEDED: I_stby typical] | — |
| Rentang Suhu Kerja | -40 °C to +150 °C (junction) | -40 °C to +150 °C junction |
| Paket | PG-DSO-20 (Power Small Outline, 20-pin) | PG-TSDSO-14 (exposed thermal pad) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Automotive Qualified | AEC-Q100 (PROFET family) | — |
| Status RoHS | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Konfigurasi Output | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |