BTS740S2XUMA1 vs BTS70402EPGXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS740S2XUMA1 disebabkan oleh Infineon dan BTS70402EPGXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | BTS740S2XUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Part Number | BTS740S2XUMA1 | — |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Fungsi | Dual-channel Smart High-Side Power Switch | Smart High-Side Power Switch |
| Tetstruktur | High-Side Switch, 1:1 N-Channel | — |
| Number of Channels | 2 | 4 |
| Output Current per Channel | 4.9 A | — |
| Operating Voltage (Load) | 5 V to 28 V | — |
| Logic Supply Voltage | 3.0 V to 5.5 V | 3.3 V / 5 V compatible MCU I/O |
| Input Type | CMOS-compatible, logic ground isolated | — |
| R_DS(on) per Channel | [DATA_NEEDED: R_DS(on) typical value] | — |
| On-State Resistance (typ, per channel) | [DATA_NEEDED: R_DS(on) typical value] | — |
| Protection Features | Overvoltage, Undervoltage, Overtemperature, Short-circuit, Open-load detection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Demagnetization | Fast active demagnetization for inductive loads | — |
| Diagnostic Output | Yes (open-load, short detection) | — |
| Standby Current | [DATA_NEEDED: I_stby typical] | — |
| Gambaran Suhu Operasi | -40 °C to +150 °C (junction) | -40 °C to +150 °C junction |
| Kemasan | PG-DSO-20 (Power Small Outline, 20-pin) | PG-TSDSO-14 (exposed thermal pad) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Automotive Qualified | AEC-Q100 (PROFET family) | — |
| Status RoHS | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Konfigurasi Output | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |