BTS740S2XUMA1 vs BTS70402EPGXUMA1 موازنہ
تفصیلی ساتھ ساتھ موازنہ از BTS740S2XUMA1 بذریعہ Infineon اور BTS70402EPGXUMA1 بذریعہ Infineon. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | BTS740S2XUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| برانڈ | Infineon | Infineon |
| زمرہ | Power MOSFET Drivers | Power MOSFET Drivers |
| لائف سائیکل کی حالت | فعال | فعال |
| Part Number | BTS740S2XUMA1 | — |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| فنکشن | Dual-channel Smart High-Side Power Switch | Smart High-Side Power Switch |
| ٹوپولوجی | High-Side Switch, 1:1 N-Channel | — |
| Number of Channels | 2 | 4 |
| Output Current per Channel | 4.9 A | — |
| Operating Voltage (Load) | 5 V to 28 V | — |
| Logic Supply Voltage | 3.0 V to 5.5 V | 3.3 V / 5 V compatible MCU I/O |
| Input Type | CMOS-compatible, logic ground isolated | — |
| R_DS(on) per Channel | [DATA_NEEDED: R_DS(on) typical value] | — |
| On-State Resistance (typ, per channel) | [DATA_NEEDED: R_DS(on) typical value] | — |
| Protection Features | Overvoltage, Undervoltage, Overtemperature, Short-circuit, Open-load detection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Demagnetization | Fast active demagnetization for inductive loads | — |
| Diagnostic Output | Yes (open-load, short detection) | — |
| Standby Current | [DATA_NEEDED: I_stby typical] | — |
| آپریٹنگ درجہ حرارت رینج | -40 °C to +150 °C (junction) | -40 °C to +150 °C junction |
| پیکیج | PG-DSO-20 (Power Small Outline, 20-pin) | PG-TSDSO-14 (exposed thermal pad) |
| ماؤنٹنگ ٹائپ | Surface Mount | Surface Mount |
| Automotive Qualified | AEC-Q100 (PROFET family) | — |
| RoHS اسٹیٹس | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| آؤٹ پٹ کنفیگریشن | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |