EPC22LC20 vs EPC21LC20 Perbandingan
Perbandingan bersamaan detil EPC22LC20 dari Intel dan EPC21LC20 dari Intel. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | EPC22LC20 | EPC21LC20 |
|---|---|---|
| Merek | Intel | Intel |
| Kategori | FPGA & CPLD | Memory ICs |
| Status Lingkungan Hidup | Obsolete | Aktif |
| Fungsi | In-System Programmable Configuration PROM for SRAM-based FPGAs | — |
| Ukuran Memori | 1.6 Mbit | — |
| Programmable Type | In System Programmable (IEEE 1532 / Jam STAPL) | — |
| Supply Voltage - Low Range | 3.0 V to 3.6 V | — |
| Supply Voltage - High Range | 4.75 V to 5.25 V | — |
| Supported FPGA Families | ACEX 1K, APEX II, APEX 20K, FLEX 10K | — |
| Configuration Interface | Altera serial configuration (DCLK / DATA0 / nSTATUS / CONF_DONE) | — |
| Programming Interface | JTAG (IEEE 1149.1 / IEEE 1532) | IEEE 1149.1 (JTAG) |
| Paket / Case | 20-LCC (J-Lead, 9 x 9 mm) | 20-pin PLCC (J-lead, JEDEC MS-018) |
| Tipe Mounting | Surface Mount (PLCC socket compatible) | Surface Mount (PLCC socket or solder) |
| Packaging | Tube | — |
| Suhu Kerja | 0 C to +70 C (commercial) | — |
| Minimum DC Input Voltage | -0.3 V | — |
| Input Overshoot Tolerance | 7.0 V for <100 mA, <20 ns no-load | — |
| Input Undershoot Tolerance | -2.0 V for <100 mA, <20 ns no-load | — |
| Lead-Free / RoHS | [DATA_NEEDED: lead-free status not in verified data] | — |
| Tipe Memori | — | Serial Configuration PROM (Flash-based, in-system programmable) |
| Density | — | 2 Mb (2,097,152 bits) |
| Configuration Mode Supported | — | Serial (PS) for Altera SRAM-based LUT FPGAs |
| Maximum DCLK Frequency | — | 10 MHz |
| Access Time | — | approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] |
| Program/Erase Endurance | — | 100 cycles minimum [DATA_NEEDED: confirm from datasheet] |
| Operating Voltage (VCC) | — | 3.0 V to 3.6 V (3.3 V typical) |
| Standby Current | — | [DATA_NEEDED: ICCSB value] |
| Active Read Current | — | [DATA_NEEDED: ICC active current] |
| Operating Temperature (commercial) | — | 0 °C to +70 °C (LC suffix) |
| Operating Temperature (industrial) | — | [DATA_NEEDED: -40 to +85 °C for LI variant] |
| Level MSL | — | [DATA_NEEDED: confirm moisture sensitivity level] |
| Status RoHS | — | [DATA_NEEDED: confirm from Altera product page] |
| Lead-Free (Pb-free) | — | [DATA_NEEDED: confirm] |
| Compatible FPGA Families | — | ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) |
| JTAG Boundary-Scan Compliant | — | Yes (IEEE Std 1149.1) |
| Data Width | — | 1 bit (serial DATA output) |