EPC22LC20 vs EPC21LC20 Karşılaştırma

Ayrıntılı yan yana karşılaştırma EPC22LC20 tarafından Intel ve EPC21LC20 tarafından IntelAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Özellik Karşılaştırması

Parametre EPC22LC20 EPC21LC20
Marka Intel Intel
Kategori FPGA & CPLD Memory ICs
Yaşam Döngüsü Durumu Obsolete Aktif
Fonksiyon In-System Programmable Configuration PROM for SRAM-based FPGAs —
Bellek Boyutu 1.6 Mbit —
Programmable Type In System Programmable (IEEE 1532 / Jam STAPL) —
Supply Voltage - Low Range 3.0 V to 3.6 V —
Supply Voltage - High Range 4.75 V to 5.25 V —
Supported FPGA Families ACEX 1K, APEX II, APEX 20K, FLEX 10K —
Configuration Interface Altera serial configuration (DCLK / DATA0 / nSTATUS / CONF_DONE) —
Programming Interface JTAG (IEEE 1149.1 / IEEE 1532) IEEE 1149.1 (JTAG)
Paket / Kas 20-LCC (J-Lead, 9 x 9 mm) 20-pin PLCC (J-lead, JEDEC MS-018)
Montaj Türü Surface Mount (PLCC socket compatible) Surface Mount (PLCC socket or solder)
Packaging Tube —
İşletim Sıcaklığı 0 C to +70 C (commercial) —
Minimum DC Input Voltage -0.3 V —
Input Overshoot Tolerance 7.0 V for <100 mA, <20 ns no-load —
Input Undershoot Tolerance -2.0 V for <100 mA, <20 ns no-load —
Lead-Free / RoHS [DATA_NEEDED: lead-free status not in verified data] —
Bellek Türü — Serial Configuration PROM (Flash-based, in-system programmable)
Density — 2 Mb (2,097,152 bits)
Configuration Mode Supported — Serial (PS) for Altera SRAM-based LUT FPGAs
Maximum DCLK Frequency — 10 MHz
Access Time — approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure]
Program/Erase Endurance — 100 cycles minimum [DATA_NEEDED: confirm from datasheet]
Operating Voltage (VCC) — 3.0 V to 3.6 V (3.3 V typical)
Standby Current — [DATA_NEEDED: ICCSB value]
Active Read Current — [DATA_NEEDED: ICC active current]
Operating Temperature (commercial) — 0 °C to +70 °C (LC suffix)
Operating Temperature (industrial) — [DATA_NEEDED: -40 to +85 °C for LI variant]
MSL Seviyesi — [DATA_NEEDED: confirm moisture sensitivity level]
RoHS Durumu — [DATA_NEEDED: confirm from Altera product page]
Lead-Free (Pb-free) — [DATA_NEEDED: confirm]
Compatible FPGA Families — ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT)
JTAG Boundary-Scan Compliant — Yes (IEEE Std 1149.1)
Data Width — 1 bit (serial DATA output)

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin