INA114BU vs INA110KU Perbandingan
Perbandingan bersamaan detil INA114BU dari Texas Instruments dan INA110KU dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | INA114BU | INA110KU |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp design | Current-feedback circuit topology |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Offset Voltage | 50 uV | 1 mV |
| Input Noise Density | 11 nV/√Hz | — |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | — |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | 12 V to 36 V |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | 17 V/us |
| Settling Time | 600 ns | 4 us to 0.01% |
| Rentang Suhu Kerja | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Paket | 16-pin SOIC | 16-pin SOIC (SOL-16) |
| Tipe Mounting | Surface mount | Surface mount |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | Monolithic FET-input instrumentation amplifier |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | unknown |
| Gain Settings | — | 1, 10, 100, 200, and 500 V/V |
| Bandwidth | — | 2.5 MHz |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Impedance | — | Very high input impedance |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Package Width | — | 7.50 mm |
| Input Stage | — | Laser-trimmed FET input stage |