INA114BU vs INA110KU Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA114BU tarafından Texas Instruments ve INA110KU tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | INA114BU | INA110KU |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp design | Current-feedback circuit topology |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Offset Voltage | 50 uV | 1 mV |
| Input Noise Density | 11 nV/√Hz | — |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | — |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | 12 V to 36 V |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | 17 V/us |
| Settling Time | 600 ns | 4 us to 0.01% |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Paket | 16-pin SOIC | 16-pin SOIC (SOL-16) |
| Montaj Türü | Surface mount | Surface mount |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | Monolithic FET-input instrumentation amplifier |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | unknown |
| Gain Settings | — | 1, 10, 100, 200, and 500 V/V |
| Bandwidth | — | 2.5 MHz |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Impedance | — | Very high input impedance |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Package Width | — | 7.50 mm |
| Input Stage | — | Laser-trimmed FET input stage |