INA114BU vs INA110KU 비교
다음의 상세 나란히 비교: INA114BU 제조: Texas Instruments 및 INA110KU 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | INA114BU | INA110KU |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp design | Current-feedback circuit topology |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Offset Voltage | 50 uV | 1 mV |
| Input Noise Density | 11 nV/√Hz | — |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | — |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | 12 V to 36 V |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | 17 V/us |
| Settling Time | 600 ns | 4 us to 0.01% |
| 동작 온도 범위 | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| 패키지 | 16-pin SOIC | 16-pin SOIC (SOL-16) |
| 실장 유형 | Surface mount | Surface mount |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | Monolithic FET-input instrumentation amplifier |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | unknown |
| Gain Settings | — | 1, 10, 100, 200, and 500 V/V |
| Bandwidth | — | 2.5 MHz |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Impedance | — | Very high input impedance |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Package Width | — | 7.50 mm |
| Input Stage | — | Laser-trimmed FET input stage |