INA114BU vs INA110KU Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci INA114BU disebabkan oleh Texas Instruments dan INA110KU disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | INA114BU | INA110KU |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp design | Current-feedback circuit topology |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Offset Voltage | 50 uV | 1 mV |
| Input Noise Density | 11 nV/√Hz | — |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | — |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | 12 V to 36 V |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | 17 V/us |
| Settling Time | 600 ns | 4 us to 0.01% |
| Gambaran Suhu Operasi | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Kemasan | 16-pin SOIC | 16-pin SOIC (SOL-16) |
| Jenis Pemasangan | Surface mount | Surface mount |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | Monolithic FET-input instrumentation amplifier |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | unknown |
| Gain Settings | — | 1, 10, 100, 200, and 500 V/V |
| Bandwidth | — | 2.5 MHz |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Impedance | — | Very high input impedance |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Package Width | — | 7.50 mm |
| Input Stage | — | Laser-trimmed FET input stage |