INA114BU vs INA110KU 比較
詳細な並列比較: INA114BU メーカー: Texas Instruments および INA110KU メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | INA114BU | INA110KU |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Amplifier Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp design | Current-feedback circuit topology |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Offset Voltage | 50 uV | 1 mV |
| Input Noise Density | 11 nV/√Hz | — |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | — |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | 12 V to 36 V |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | 17 V/us |
| Settling Time | 600 ns | 4 us to 0.01% |
| 動作温度範囲 | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| パッケージ | 16-pin SOIC | 16-pin SOIC (SOL-16) |
| 実装タイプ | Surface mount | Surface mount |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | Monolithic FET-input instrumentation amplifier |
| RoHS ステータス | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | unknown |
| Gain Settings | — | 1, 10, 100, 200, and 500 V/V |
| Bandwidth | — | 2.5 MHz |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Impedance | — | Very high input impedance |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Package Width | — | 7.50 mm |
| Input Stage | — | Laser-trimmed FET input stage |