INA2126P vs INA2126U Perbandingan
Perbandingan bersamaan detil INA2126P dari Texas Instruments dan INA2126U dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
INA2126P - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments
INA2126P ✓ AktifTexas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | INA2126P | INA2126U |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Channels | 2 channels | 2 channels |
| Architecture | Two-op-amp instrumentation amplifier | — |
| Maximum Supply Voltage | 36 V | — |
| Operating Voltage Range | ±1.35 V to ±18 V | — |
| Arus Memerintah | 175 µA/channel | — |
| Offset Voltage | 250 µV | — |
| Input Type | Differential | — |
| Application | Low-noise differential-signal acquisition | — |
| Circuit Count | 2 circuits | — |
| Paket | 16-PDIP | 16-pin SOIC |
| Tipe Mounting | Through-hole | Surface mount |
| Packaging | Tube | — |
| Product Type | Precision instrumentation amplifier | — |
| Arus Pemuat | 350 µA for two channels | — |
| Input Bias Current | [DATA_NEEDED: Input bias current] | [DATA_NEEDED: input bias current] |
| Gain Range | [DATA_NEEDED: Gain range] | — |
| Gain Bandwidth Product | [DATA_NEEDED: Gain bandwidth product] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: Common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection ratio] |
| Rentang Suhu Kerja | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Amplifier Type | — | Dual precision instrumentation amplifier |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Quiescent Current per Channel | — | 175 µA |
| Maximum Input Offset Voltage | — | 250 µV |
| Minimum Voltage Gain | — | 5 V/V |
| Maximum Voltage Gain | — | 10000 V/V |
| Typical Gain-Bandwidth Product | — | 200 kHz |
| Typical Input Noise Density at 1 kHz | — | 0.4 nV/√Hz |
| Internal Architecture | — | Two-op-amp instrumentation amplifier |
| Slew Rate | — | [DATA_NEEDED: slew rate] |