INA2126P vs INA2126U Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng INA2126P sa pamamagitan ng Texas Instruments at INA2126U sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
INA2126P - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments
INA2126P ✓ NakahandaTexas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ NakahandaPagsanggunian na paghahambing
| Parametro | INA2126P | INA2126U |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Number of Channels | 2 channels | 2 channels |
| Architecture | Two-op-amp instrumentation amplifier | — |
| Maximum Supply Voltage | 36 V | — |
| Operating Voltage Range | ±1.35 V to ±18 V | — |
| Kuru-kuryente ng Kapayapaan | 175 µA/channel | — |
| Offset Voltage | 250 µV | — |
| Input Type | Differential | — |
| Application | Low-noise differential-signal acquisition | — |
| Circuit Count | 2 circuits | — |
| Packhaging | 16-PDIP | 16-pin SOIC |
| Uri ng Pagpapasok | Through-hole | Surface mount |
| Packaging | Tube | — |
| Product Type | Precision instrumentation amplifier | — |
| Kuru-kuryente ng Pagbibigay | 350 µA for two channels | — |
| Input Bias Current | [DATA_NEEDED: Input bias current] | [DATA_NEEDED: input bias current] |
| Gain Range | [DATA_NEEDED: Gain range] | — |
| Gain Bandwidth Product | [DATA_NEEDED: Gain bandwidth product] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: Common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection ratio] |
| Hanay ng Temperature na Operasyon | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Amplifier Type | — | Dual precision instrumentation amplifier |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Quiescent Current per Channel | — | 175 µA |
| Maximum Input Offset Voltage | — | 250 µV |
| Minimum Voltage Gain | — | 5 V/V |
| Maximum Voltage Gain | — | 10000 V/V |
| Typical Gain-Bandwidth Product | — | 200 kHz |
| Typical Input Noise Density at 1 kHz | — | 0.4 nV/√Hz |
| Internal Architecture | — | Two-op-amp instrumentation amplifier |
| Slew Rate | — | [DATA_NEEDED: slew rate] |