MMA6261QR2 vs MMA6233QR2 Perbandingan
Perbandingan bersamaan detil MMA6261QR2 dari NXP Semiconductors dan MMA6233QR2 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MMA6233QR2 - ±10g Dual-Axis Micromachined Accelerometer | NXP
MMA6233QR2 ObsoletePerbandingan Spesifikasi
| Parameter Umum | MMA6261QR2 | MMA6233QR2 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | Obsolete | Obsolete |
| Tipe Pengukur | Accelerometer, dual-axis (X, Y) | Accelerometer, Dual-Axis (X, Y) |
| Sensing Technology | Capacitive MEMS | — |
| Acceleration Range | ±1.5 g | — |
| Number of Axes | 2 (X, Y) | — |
| Tipe Output | Analog voltage, ratiometric | Analog, ratiometric |
| Bandwidth | 300 Hz | 900 Hz (maximum) |
| Supply Voltage (VDD) | 2.7 V to 3.6 V | 3.0 V to 5.25 V |
| Arus Pemuat | 1.5 mA (typical) | 2.5 mA (typical, [DATA_NEEDED: max]) |
| Sensitivity | factory-set, ratiometric | 120 mV/g (typical at 3.3V Vdd, [DATA_NEEDED: sensitivity tolerance]) |
| Zero-g Offset | factory-set | — |
| Filter | 1-pole low-pass, factory-set | — |
| Self-Test | Yes (per axis) | Yes (active-high logic input) |
| Suhu Kerja | -20 C to +85 C | -20C to +85C |
| Paket | 16-QFN-EP (6x6 mm) HQCCN | 16-pin QFN-EP (6x6 mm) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Status RoHS | RoHS Compliant (contains lead, lead-free terminal finish) | Compliant |
| Jumlah Pin | 16 | — |
| Full-Scale Range | — | ±10g (±6g via g-select) |
| Output Voltage at 0g | — | VDD/2 |
| Tetesan Bising | — | [DATA_NEEDED: noise density] |
| Nonlinearity | — | [DATA_NEEDED: nonlinearity %FS] |
| g-Select Input | — | Yes (±10g or ±6g selection) |
| Filter Type | — | 1-pole low-pass (factory-set cut-off) |
| Lead-Free Status | — | Contains Lead (NXP datasheet note) |
| Level MSL | — | [DATA_NEEDED: MSL rating] |