MMA6261QR2 vs MMA6233QR2 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MMA6261QR2 disebabkan oleh NXP Semiconductors dan MMA6233QR2 disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
NXP Semiconductors
MMA6233QR2 - ±10g Dual-Axis Micromachined Accelerometer | NXP
MMA6233QR2 ObsoletePengandingan Spesifikasi
| Parametr | MMA6261QR2 | MMA6233QR2 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | Obsolete | Obsolete |
| Jenis Sensus | Accelerometer, dual-axis (X, Y) | Accelerometer, Dual-Axis (X, Y) |
| Sensing Technology | Capacitive MEMS | — |
| Acceleration Range | ±1.5 g | — |
| Number of Axes | 2 (X, Y) | — |
| Jenis Output | Analog voltage, ratiometric | Analog, ratiometric |
| Bandwidth | 300 Hz | 900 Hz (maximum) |
| Supply Voltage (VDD) | 2.7 V to 3.6 V | 3.0 V to 5.25 V |
| Arus Pemberi Arus | 1.5 mA (typical) | 2.5 mA (typical, [DATA_NEEDED: max]) |
| Sensitivity | factory-set, ratiometric | 120 mV/g (typical at 3.3V Vdd, [DATA_NEEDED: sensitivity tolerance]) |
| Zero-g Offset | factory-set | — |
| Filter | 1-pole low-pass, factory-set | — |
| Self-Test | Yes (per axis) | Yes (active-high logic input) |
| Suhu Operasi | -20 C to +85 C | -20C to +85C |
| Kemasan | 16-QFN-EP (6x6 mm) HQCCN | 16-pin QFN-EP (6x6 mm) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Status RoHS | RoHS Compliant (contains lead, lead-free terminal finish) | Compliant |
| Kiraan Pin | 16 | — |
| Full-Scale Range | — | ±10g (±6g via g-select) |
| Output Voltage at 0g | — | VDD/2 |
| Jisim Bising | — | [DATA_NEEDED: noise density] |
| Nonlinearity | — | [DATA_NEEDED: nonlinearity %FS] |
| g-Select Input | — | Yes (±10g or ±6g selection) |
| Filter Type | — | 1-pole low-pass (factory-set cut-off) |
| Lead-Free Status | — | Contains Lead (NXP datasheet note) |
| Aras MSL | — | [DATA_NEEDED: MSL rating] |